3D Model Datasheet SPICE-Modell SPICE S-Param

026011F (0703) Series

Optimized Wirewound Ferrite Beads

Our 026011F (0603) Series wirewound ferrite beads achieve even higher optomized impedance and lower DCR than our 0201AF Series in a slightly taller height, still only 0.55 mm max. Ferrite construction and heavy gage wire means high current handling for 0201 size. Extremely low DCR assures lowest insertion loss for high efficiency in mobile applications. These tiny beads eliminate noise in small power supplies and provide isolation of RF signals.

Optimized 0201 size – 0.7 × 0.3 × 0.55 mm high
High impedance for RF isolation in cellular applications
Higher inductance values than other 0201 inductors – up to 560 nH
Ferrite construction for high current handling

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C474	7 (20 of each)	$45,00

Technische Daten

Electrical specifications at 25°C.

Teilenummer 1	Induktivität (nH) 2 (Toleranz: ±5%)	Impedanz typ (Ω)		SRF typ (GHz) 3	DCR max (Ω) 4	Irms (mA) 5
Teilenummer 1	Induktivität (nH) 2 (Toleranz: ±5%)	100 MHz	900 MHz	SRF typ (GHz) 3	DCR max (Ω) 4	Irms (mA) 5
026011F-270XJR_	27	16,60	133,70	3,9	0,125	480
026011F-720XJR_	72	42,10	353,70	2,6	0,460	210
026011F-101XJR_	100	59,20	506,10	2,3	0,570	200
026011F-151XJR_	150	91,52	747,20	1,8	0,680	190
026011F-271XJR_	270	154,40	1434,00	1,6	1,300	130
026011F-431XJR_	430	253,00	2507,00	1,1	2,100	100
026011F-561XJR_	560	320,50	3435,00	1,0	3,100	90

Hinweise

When ordering, please specify packaging code: e.g. 026011F-561XJRY
Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
DCR measured at 25°C on a Keithley 580 Micro-ohmmeter (or equivalent) and a Coilcraft CCF1192 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Irms: Current that causes a 15°C temperature rise from 85°C ambient. This information is for reference only and does not represent absolute maximum ratings. Because of their open construction, these parts will not saturate. Because of their open construction, these parts will not saturate.

Anschlüsse:

RoHS compliant, matte tin over nickel over silver platinum-glass frit.

Verpackung:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
Y = 7″ machine-ready reel. EIA-481 punched paper tape (10,000 parts per full reel).
U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W.

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +85°C with Irms current

Lagertemperaturbereich:

Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C

Maximale Bauteiltemperatur:

+100°C (ambient + temp rise)

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs. Frequency

Impedance vs. Frequency

Physikalische Eigenschaften

A max	B max		C max	D	E	F	G	H
A max	026011F-270	All Others	C max	D	E	F	G	H
0.030	0.015	0.013	0.022	0.0110	0.005	0.010	0.016	0.014	inches
0,76	0,38	0,33	0,55	0,28	0,13	0,25	0,41	0,36	mm

Gurt/Rolle-Spezifikationen

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)					Orientation
7" (178 mm)	7" (178 mm)	A	B	C	D	E	W	P	Po	P1	T
2000	10,000*	178	100	13	14,4	8,4	8	2	4	2	0,68

* Special order

Allgemeine Spezifikation

Kernmaterial:

Ferrite

Gewicht:

0.9 – 1.1 mg

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

026011F (0703) Series

Optimized Wirewound Ferrite Beads