站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

AC1584-AL

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:

很抱歉,目前我们的网上商店不提供所选元件。

请点击“请求报价”联系支持部门,以获取自定义报价或了解更多信息。

. 现货,可今天发货.
索取样品:

典型应用

与Monolithic Power MP8017一起使用

输入电压 输出 功率 Fsw
37 V 57 V 5 V , 2.4 A 13 W 100 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 1
(公差: ±10%)
Isat (A) DCR max (Ω) 2 最大
漏电感
(µH) 3
匝数比 隔离
电压 (Vrms) 4
Pri Sec1 Sec2 Pri : Sec1 : Sec2
AC1584-ALD 55 1.8 0.195 0.024 0.018 1.25 1 : 0.208 : 0.208 1500
注释
  1. Inductance is for the primary, measured at 100 kHz, 0.1 Vrms, 0 Adc.
  2. DC current that causes the primary inductance drop 30% from its value without current.
  3. Leakage inductance is for the primary winding with the secondary windings shorted.
  4. 1500 Vrms, one minute isolation (hipot) between primary and secondary.

端子:

  • RoHS tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

L vs Current

原理图

ac1584s.gif

Connect pin 5 to 6 and pin 7 to 8 on the PC board

物理特性

ac1584d.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
300 330 100 13 38,4 32,4 32 20 4 2 10,69 0,5

一般规格

核心材料:
Ferrite
重量:
2.1 g
包装:
300/13″ reel Plastic tape: 32 mm wide, 0.50 mm thick, 20 mm pocket spacing, 10.69 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.