站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO6610 Series

Low Profile Surface Mount Power Inductors

符合RoHS AEC-Q flag
Coilcraft LPO6610 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve
  • AEC-Q200 Grade 3 (−40°C to +85°C)

立即购买:
计数 单价
1 $1.46
250 $1.18
500 $0.90
1000 $0.75
5000 $0.61

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
C367 16 (3 of each) $50.00

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2
(公差: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (A) 5
LPO6610-122ML_ 1.2 0.080 190 2.1 1.7
LPO6610-152ML_ 1.5 0.10 140 1.9 1.5
LPO6610-222ML_ 2.2 0.12 115 1.6 1.4
LPO6610-332ML_ 3.3 0.16 90.0 1.3 1.2
LPO6610-472ML_ 4.7 0.20 88.0 1.1 1.1
LPO6610-682ML_ 6.8 0.32 66.0 0.90 0.85
LPO6610-103ML_ 10 0.41 55.0 0.80 0.75
LPO6610-153ML_ 15 0.55 42.0 0.65 0.60
LPO6610-223ML_ 22 0.85 38.0 0.50 0.52
LPO6610-333ML_ 33 1.3 29.0 0.40 0.42
LPO6610-473ML_ 47 1.8 22.0 0.35 0.36
LPO6610-683ML_ 68 2.5 18.0 0.30 0.30
LPO6610-104ML_ 100 3.5 14.0 0.25 0.26
LPO6610-154ML_ 150 5.0 12.0 0.18 0.21
LPO6610-224ML_ 220 7.0 10.0 0.16 0.18
LPO6610-334ML_ 330 15.0 8.0 0.13 0.13
注释
  1. When ordering, please specify termination and packaging codes: e.g. LPO6610-334MLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves

端子:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Inductance vs. Frequency

Inductance vs. Current

物理特性

lpo6610d-(1).gif

卷装规格

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation 
7" (178 mm) A B C D E W P Po P1 H T part_or_aa.gif
1000 178 60 13 18,4 12,4 12 8 4 2 1,2 0,3
‡ Part marking does not indicate polarity

一般规格

核心材料:
Ferrite
重量:
91.0 - 95.0 mg
包装:
1000/7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.2 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列

相关产品族