站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO4815 Series

Low Profile Surface Mount Power Inductors

符合RoHS
Coilcraft LPO4815 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve

立即购买:
计数 单价
1 $1.38
250 $1.12
500 $0.90
1000 $0.69
5000 $0.57

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
C376 19 (3 of each) $55.00

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2 公差 (%) DCR max (Ω) 3 SRF typ (MHz) 4 Isat (A) 5 Irms (A) 6
LPO4815-102ML_ 1.0 20 0.036 230 1.6 1.9
LPO4815-152ML_ 1.5 20 0.085 200 1.5 1.7
LPO4815-222ML_ 2.2 20 0.088 150 1.1 1.5
LPO4815-332ML_ 3.3 20 0.12 115 0.90 1.3
LPO4815-392ML_ 3.9 20 0.13 105 0.86 1.2
LPO4815-472ML_ 4.7 20 0.15 95.0 0.77 1.1
LPO4815-682ML_ 6.8 20 0.18 72.0 0.65 1.0
LPO4815-822ML_ 8.2 20 0.22 65.0 0.58 0.90
LPO4815-103KL_ 10 10 0.23 60.0 0.50 0.85
LPO4815-123KL_ 12 10 0.31 50.0 0.45 0.80
LPO4815-153KL_ 15 10 0.36 45.0 0.42 0.75
LPO4815-223KL_ 22 10 0.48 35.0 0.36 0.70
LPO4815-333KL_ 33 10 0.71 30.0 0.28 0.65
LPO4815-393KL_ 39 10 0.83 25.0 0.26 0.60
LPO4815-473KL_ 47 10 1.2 25.0 0.22 0.55
LPO4815-683KL_ 68 10 1.4 20.0 0.20 0.45
LPO4815-104KL_ 100 10 2.2 15.0 0.15 0.36
LPO4815-154KL_ 150 10 3.2 12.0 0.13 0.30
LPO4815-224KL_ 220 10 4.3 10.0 0.11 0.27
注释
  1. When ordering, please specify termination and packaging codes: e.g. LPO4815-224KLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using Agilent/HP 4191A or equivalent.
  5. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves
  6. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (3500 parts per full reel).
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Inductance vs. Current

Inductance vs. Frequency

物理特性

lpo4815d.gif
dims_inches_mm.gif

卷装规格

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation‡
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac.gif
1000 3500* 178/330 60/100 13 18,4 12,4 12 8 4 2 1,6 0,3
* Special order
‡ Part marking does not indicate polarity
 

一般规格

核心材料:
Ferrite
重量:
70.0 - 78.5 mg
包装:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.6 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
推荐的取放吸嘴:
OD: 4.6 mm; ID: < 2.3 mm
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列

相关产品族