站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DT3316P Series

Shielded Surface Mount Power Inductors

符合RoHS
We will continue to manufacture and support the DT3316P indefinitely, however for new designs, we recommend the MSS7341, MSS1038 or MSS1260 as alternatives. These series are more cost effective and offer better current handling.

dt3316_nr.jpg
DT3316P    MSS7341   MSS1038   MSS1260
  • This series was always RoHS compliant; only the part numbers changed. Added characters indicate tolerance, RoHS compliance, and packaging.  View old data sheet.
  • Specially designed to provide low loss benefit of ferrite and soft saturation
  • Defense Supply Center CID A-A-59406
  • RoHS-compliant. 260°C compatible. Electroplated gold (<50 µin) over nickel over phos bronze terminations
  • COTS Plus tin-silver-copper and tin-lead terminations available
立即购买:
计数 单价
1 $1.76
500 $1.42
1000 $1.12
2000 $0.91
5000 $0.75

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2
(公差: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (mA) 5
20% drop 30% drop
DT3316P-102ML_ 1.0 0.025 60.0 4.5 8.0 4000
DT3316P-152ML_ 1.5 0.030 55.0 4.0 5.5 4000
DT3316P-222ML_ 2.2 0.035 55.0 1.9 3.0 4000
DT3316P-332ML_ 3.3 0.040 50.0 1.6 2.8 4000
DT3316P-472ML_ 4.7 0.045 45.0 1.5 2.4 3000
DT3316P-682ML_ 6.8 0.050 40.0 1.3 2.2 2500
DT3316P-103ML_ 10 0.055 35.0 0.80 1.2 2000
DT3316P-153ML_ 15 0.060 25.0 0.65 1.1 1800
DT3316P-223ML_ 22 0.084 22.0 0.60 1.0 1500
DT3316P-333ML_ 33 0.090 18.0 0.55 0.90 1300
DT3316P-473ML_ 47 0.11 16.0 0.32 0.50 1000
DT3316P-683ML_ 68 0.15 12.0 0.28 0.45 900
DT3316P-104ML_ 100 0.29 9.0 0.28 0.40 800
DT3316P-154ML_ 150 0.36 8.0 0.21 0.35 600
DT3316P-224ML_ 220 0.39 6.0 0.17 0.26 500
DT3316P-334ML_ 330 0.73 5.0 0.13 0.20 400
DT3316P-474ML_ 470 0.88 4.0 0.11 0.18 350
DT3316P-684ML_ 680 1.2 3.0 0.090 0.14 300
DT3316P-105ML_ 1000 1.5 2.5 0.085 0.14 250
注释
  1. When ordering, please specify termination and packaging codes: e.g. DT3316P-105MLD
  2. Inductance tested at 100 kHz, 0.1 Vrms.
  3. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
  5. Irms: Current that causes a 10°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

  • L = Gold over nickel over phos bronze terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

包装:

  • D = 13" reel, machine-ready 
    EIA-481 embossed plastic tape (1000 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
e Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+95°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Inductance vs Current

物理特性

dt3316d.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_t.gif or
part_or_d.gif
1000 330 100 13 30,4 24,4 24 12 4 2 5,8 0,33
‡ Dot or number marking does not indicate polarity

一般规格

核心材料:
Ferrite
重量:
0.86 – 1.06 g
包装:
1000 per 13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品族