Datasheet 3D Model

SLC1480 Series

High Current Shielded Power Inductors

Coilcraft’s SLC1480 Series of high-current shielded power inductors feature sub-milliohm DC resistance and very high current handling. Magnetic shielding and tight DCR tolerances make them ideal for low voltage multi-phase VRM/VRD/EVRD regulators and current sensing circuits.

Sub-milliohm DC resistance and tight DCR tolerance
Ferrite construction for flat L vs I with high current
Magnetic shielding allows high-density packaging
Designed for high-speed switch mode applications.
Ideal for multi-phase VRM/VRD/EVRD regulators

Need parts for space, military or other critical applications?
See Coilcraft AE613PMM Series

立即购买:

零件号

查找我的元件

计数	单价
1	$1.96
250	$1.65
500	$1.12
1000	$0.95
2500	$0.84
5000	$0.78

对于大批量采购或非库存产品，点击这里请求报价。

Tolerance

M = 20%

Termination

L = Matte tin over nickel

Packaging

D = 13" machine-ready reel

. 现货，可今天发货.

索取样品:

零件号

查找我的元件

设计套件:

套件	电感值	价格
C467	40 (3 of each)	$110.00

规格

Electrical specifications at 25°C.

零件号 1	电感 (nH) 2 (公差: ±20%)	DCR ± 17% (mΩ) 3	SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
零件号 1	电感 (nH) 2 (公差: ±20%)	DCR ± 17% (mΩ) 3	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
SLC1480-111MLD	110	0.18	130	110	128	130	64.0	83.0
SLC1480-131MLD	130	0.18	110	97.0	110	112	64.0	83.0
SLC1480-151MLD	150	0.18	108	88.0	95.0	97.0	64.0	83.0
SLC1480-171MLD	170	0.18	75.0	80.0	87.0	90.0	64.0	83.0
SLC1480-201MLD	200	0.18	68.0	65.0	72.0	76.0	64.0	83.0
SLC1480-231MLD	230	0.18	59.0	57.0	64.0	67.0	64.0	83.0
SLC1480-261MLD	260	0.18	50.0	50.0	57.0	61.0	64.0	83.0
SLC1480-301MLD	300	0.18	46.0	42.0	49.0	52.0	64.0	83.0
SLC1480-321MLD	320	0.18	42.0	38.0	44.0	48.0	64.0	83.0
SLC1480-441MLD	440	0.18	35.0	28.0	32.0	35.0	64.0	83.0

注释

When ordering, please specify packaging code: e.g. SLC1480-441MLD
Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4284.
DCR measured at 25°C on a micro-ohmmeter at the points indicated in the diagram. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES network analyzer or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

端子:

RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost.

包装:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (500 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

环境

环境:

符合RoHS

环境温度范围:

–40°C to +85°C with (40°C rise) Irms

储存温度范围:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

最高元件温度:

+125°C (ambient + temp rise)

故障率（FIT）/平均故障间隔时间（MTBF）:

See FIT/MTBF Calculations

性能曲线

Inductance vs. Current

Inductance vs. Frequency

物理特性

卷装规格

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
500	330	100	13	30,4	24,4	24	16	4	2	8,1	0,4

一般规格

核心材料:

Ferrite

重量:

5.25 g

包装:

500/13″ reel; Plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 8.1 mm pocket depth

焊接/清洗

湿气敏感度等级（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

抗焊接热:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

焊接之前，请参阅焊接线艺元件。

PCB清洗:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLC1480 Series

High Current Shielded Power Inductors

规格

端子:

包装:

性能曲线

Inductance vs. Current

Inductance vs. Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

FA2769 SMT Power Inductor

SLC1049 Series

SLC1175 Series

SLC7530 Series

SLC7649S Series

SLR1050 Series

SLR1065 Series

SLR1070 Series

SLR1075 Series

SLR1190 Series

SLR4040 Series

SLR6810 Series

SLR7010 Series

相关产品族

AGM,AGP,VER

SER

MLC

MVR

仓库

语言设定

货币设定

SLC1480 Series

High Current Shielded Power Inductors

所选配置不可用

规格

端子:

包装:

性能曲线

Inductance vs. Current

Inductance vs. Frequency

物理特性

卷装规格

一般规格

焊接/清洗

相关产品系列

FA2769 SMT Power Inductor

SLC1049 Series

SLC1175 Series

SLC7530 Series

SLC7649S Series

SLR1050 Series

SLR1065 Series

SLR1070 Series

SLR1075 Series

SLR1190 Series

SLR4040 Series

SLR6810 Series

SLR7010 Series

相关产品族

AGM,AGP,VER

SER

MLC

MVR

警告