사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DA2303-AL

DA2303-ALD

RoHS 준수 AEC-Q flag

Great News! More Choices!
See UA825x for a significantly smaller and lower profile solution (10 × 6.8 × 4.3 mm).

For increased creepage and clearance specification along with improved isolation rating, see ZA9801 (17.07 x 10.3 x 5.97 mm).

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $3.31
300 $2.85
600 $2.37
1200 $1.98
2400 $1.59
5000 $1.46

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

통상적인 적용 분야

Texas Instruments SN6501, ISO1176T/35T/3086T와(과) 호환

일차 전압 이차 전압 전력 1 FSW
5 V 6 V 7.2 W 500 kHz

사양

Electrical specifications at 25°C.

부품 번호 2
(Hover for schematics)
인덕턴스
최소 (µH) 3
DCR max (Ω) 4 누설
인덕턴스
최대 (µH) 5
권수비 전압시간적
(V-µs) 6
절연
전압 (Vrms) 7
Pri Sec Pri : Sec
DA2303-AL_ 45.6 0.130 0.260 1.00 1 : 1.5 34.4 2500
메모
  1. Calculated output power based on 150 kHz operating frequency. Power varies depending on application.
  2. When ordering, please specify termination and packaging codes: e.g. DA2303-ALD
  3. Inductance is tested between pins 4 and 3 at 500 kHz, 0.5 Vrms, 0 Adc.
  4. DCR is per winding at 25°C. For other operating temperatures, use this use this DCR at Temperature calculator.
  5. Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
  6. Volt-time product is for the primary, between pins 4 and 1 with pins 2 and 3 connected.
  7. 2500 Vrms, one minute primary to secondary isolation.

종단 처리:

  • L = RoHS compliant tin-silver over tin over nickel over phos bronze.
  • = RoHS tin-silver-copper (95.5/4/0.5). (Special order)
  • S = non-RoHS tin-lead (63/37). (Special order)

패키지:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (600 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
−40°C to +125°C
보관 온도 범위:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

da2303s.gif

물리적 특성

da2303d.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
600 330 100 13 30,4 24,4 24 16 4 2 6,1 0,37

일반 사양

코어 소재:
Ferrite
중량:
0.94 – 1.0 g
패키지:
600/13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Three reflows at >217°C for 90 seconds (+260°C ±:5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품

관련 제품 시리즈