サイトの設定

倉庫
言語の設定
通貨の設定
製品
リソース
ビデオライブラリ
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO2506 Series

Low Profile Surface Mount Power Inductors

RoHS準拠 AEC-Q flag
Coilcraft LPO2506 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • InBoard® version is only 1,19 mm above board
  • On-board version is 1,65 mm high
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve
  • AEC-Q200 Grade 3 (−40°C to +85°C)

今すぐ購入:
個数 単価
1 $1.65
250 $1.36
500 $1.06
1000 $0.91
5000 $0.80

大量のご注文または在庫のない商品については、お見積もりをご依頼ください

. 在庫あり、即日出荷可能.
サンプルを依頼:
デザイナーズキット:
キット 価格
C332 16 (3 of each) $60.00
C333 16 (3 of each) $60.00

仕様

Electrical specifications at 25°C.

In-Board Version
部品番号 1
On-Board Version
部品番号 1
インダクタンス (µH) 2
(公差: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (A) 5
LPO2506I-472L_ LPO2506O-472L_ 4.7 0.15 90.0 1.6 1.9
LPO2506I-682L_ LPO2506O-682L_ 6.8 0.17 75.0 1.3 1.7
LPO2506I-822L_ LPO2506O-822L_ 8.2 0.20 65.0 1.0 1.5
LPO2506I-103L_ LPO2506O-103L_ 10 0.24 60.0 1.0 1.5
LPO2506I-153L_ LPO2506O-153L_ 15 0.30 45.0 0.90 1.3
LPO2506I-223L_ LPO2506O-223L_ 22 0.42 35.0 0.70 1.0
LPO2506I-333L_ LPO2506O-333L_ 33 0.55 30.0 0.60 0.90
LPO2506I-473L_ LPO2506O-473L_ 47 0.77 22.0 0.50 0.70
LPO2506I-683L_ LPO2506O-683L_ 68 1.1 20.0 0.40 0.60
LPO2506I-104L_ LPO2506O-104L_ 100 1.6 15.0 0.30 0.50
LPO2506I-154L_ LPO2506O-154L_ 150 2.5 12.0 0.25 0.40
LPO2506I-224L_ LPO2506O-224L_ 220 3.7 10.0 0.22 0.32
LPO2506I-334L_ LPO2506O-334L_ 330 4.7 8.0 0.18 0.28
LPO2506I-474L_ LPO2506O-474L_ 470 6.8 6.5 0.14 0.24
LPO2506I-684L_ LPO2506O-684L_ 680 9.2 5.5 0.12 0.20
LPO2506I-105L_ LPO2506O-105L_ 1000 14.2 4.5 0.10 0.16
メモ
  1. When ordering, please specify termination and packaging codes: e.g. LPO2506I-105LD or LPO2506O-105LD.
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

終端処理:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
環境
環境:
RoHS準拠
周囲温度範囲:
−40°C to +85°C with Irms current
保管温度範囲:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最大部品温度:
+125°C (ambient + temp rise)
時間内の障害(FIT)/平均障害間隔(MTBF):

性能曲線

Inductance vs. Frequency

Inductance vs. Current

物理的特徴

In-Board Version

lpo2506d.gif

On-Board Version

lpo250do.gif
dims_inches_mm.gif

テープ&リール仕様

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
Part 13" (330 mm) A B C D E W P Po P1 H T part_or_k-(1).gif or
part_or_ac-(1).gif
InBoard 1000 330 100 13 22,4 16,4 16 12 4 2 2,23 0,25
On-Board 1000 330 100 13 22,4 16,4 16 12 4 2 1,8 0,3
‡ Part marking does not indicate polarity

一般仕様

コア材料:
Ferrite
重量:
240 - 260 mg
パッケージ:
1000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth

はんだ付け/洗浄

湿度感度レベル(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
はんだに対する耐熱性:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。
PCB洗浄:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

関連製品シリーズ

関連製品ファミリー