XFL2010 Series

Ultra-Low Profile Shielded Power Inductors

XFL2010 Series power inductors are among our smallest molded power inductors. They offer a high voltage rating of 40 V, which is much higher than similarly-sized competitive products. The XFL2010 also provides high current handling with low DCR and low AC losses. These ultra-low-profile power inductors are suitable for a wide range of applications from smart phones, IoT and wearable devices, to industrial and automotive applications.

High current handling with very low DCR
Magnetically shielded
Composite construction minimizes audible buzzing
No thermal-aging and perfect for high-temperature applications
AEC-Q200 qualified (–40°C to +125°C)
- AEC-Q200 qualified (–40°C to +85°C) for value -224 only

Need parts for space, military or other critical applications?
See Coilcraft AE338PZA Series

Jetzt kaufen:

Teilenummer

Finde mein Bauteil

Anzahl	Einzelpreis
1	$2,00
50	$1,73
100	$1,32
250	$0,95
500	$0,84
1000	$0,66
2000	$0,57
6000	$0,52

Für große Mengen oder nicht vorrätige Artikel bitte ein Angebot anfordern.

Tolerance

M = 20%

Termination

E = Tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum

Packaging

C = 7" machine-ready reel

. Auf Lager, noch heute versandbereit.

Muster anfordern:

Teilenummer

Finde mein Bauteil

Designer-Kits:

Kit	Werte	Preis
C509	49 (3 of each)	$125,00
C513	23 (5 of each)	$65,00

Teilenummer 1	Induktivität (µH) 2 (Toleranz: ±20%)	DCR (Ω) 3	SRF typ (MHz) 4	Isat (A) 5	Irms (A) 6
XFL2010-400MEC	0,04	0,012	0,016	2200	5,500	7,500	8,600	3,40	4,80
XFL2010-121MEC	0,12	0,017	0,022	730	3,000	4,250	4,900	2,70	3,70
XFL2010-221MEC	0,22	0,020	0,025	400	2,100	3,200	3,750	2,30	3,10
XFL2010-381MEC	0,38	0,028	0,033	280	1,700	2,500	3,050	2,10	2,85
XFL2010-601MEC	0,6	0,047	0,054	200	1,300	1,950	2,320	1,75	2,35
XFL2010-821MEC	0,82	0,052	0,061	160	1,050	1,520	1,950	1,60	2,15
XFL2010-102MEC	1,0	0,072	0,083	130	0,950	1,420	1,680	1,30	1,80
XFL2010-152MEC	1,5	0,100	0,115	110	0,750	1,160	1,450	1,15	1,55
XFL2010-222MEC	2,2	0,136	0,156	90	0,700	1,060	1,250	1,00	1,35
XFL2010-332MEC	3,3	0,185	0,213	65	0,600	0,850	1,000	0,88	1,20
XFL2010-472MEC	4,7	0,278	0,320	60	0,420	0,640	0,780	0,68	0,91
XFL2010-682MEC	6,8	0,352	0,405	50	0,390	0,610	0,720	0,58	0,79
XFL2010-822MEC	8,2	0,445	0,511	40	0,380	0,550	0,620	0,56	0,76
XFL2010-103MEC	10,0	0,517	0,595	36	0,290	0,450	0,560	0,51	0,67
XFL2010-183MEC	18,0	1,020	1,170	29	0,245	0,370	0,435	0,34	0,46
XFL2010-223MEC	22,0	1,300	1,500	23	0,190	0,280	0,340	0,31	0,42
XFL2010-333MEC	33,0	1,860	2,140	18	0,160	0,240	0,285	0,26	0,35
XFL2010-473MEC	47,0	2,530	2,910	16	0,130	0,200	0,250	0,25	0,31
XFL2010-563MEC	56,0	3,180	3,660	15	0,120	0,175	0,215	0,20	0,27
XFL2010-683MEC	68,0	3,460	3,980	13	0,110	0,170	0,210	0,19	0,26
XFL2010-823MEC	82,0	5,050	5,810	12	0,096	0,150	0,185	0,16	0,21
XFL2010-104MEC	100,0	6,070	6,980	11	0,092	0,140	0,172	0,15	0,20
XFL2010-224MEC	220,0	11,880	13,660	6	0,060	0,094	0,113	0,11	0,14

Hinweise

When ordering, please specify termination and packaging codes: e.g. XFL2010-224MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

**Operating voltage: Voltage capability varies by part number and in many cases may be higher than the listed voltage.

Anschlüsse:

E = RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum.
S = non-RoHS tin-lead (63/37). (Special order, added cost)

Verpackung:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).

Umwelt/Umgebung

Umwelt/Umgebung:

RoHS-konform , Halogenfrei

Umgebungstemperaturbereich:

–40°C to +165°C with (40°C rise) Irms current; –40°C to +85°C with (40°C rise) for -224 value only

Lagertemperaturbereich:

Component: –55°C to +165°C; +125°C for -224 only
Tape and reel packaging: –55°C to +80°C

Maximale Bauteiltemperatur:

+165°C (ambient + temp rise); +125°C for -224 only

Ausfälle pro Zeiteinheit (FIT) / Mittlere Ausfallzeit (MTBF):

See FIT/MTBF Calculations

Kennlinien

Inductance vs Current

Inductance vs Frequency

Parts per reel	Reel dimensions (mm)	Tape dimensions (mm)	Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,19	0,23

Allgemeine Spezifikation

Kernmaterial:

Composite

Gewicht:

19 - 21 mg

Verpackung:

2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth

Löten/Reinigen

Feuchteempfindlichkeitsstufe (MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

Löttemperaturbeständigkeit:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Vor dem Löten bitte den Beitrag Löten von Coilcraft-Bauelementen lesen.

Baugruppenreinigung:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XFL2010 Series

Ultra-Low Profile Shielded Power Inductors