站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Z9280

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $2.49
500 $2.17
1000 $1.89
2500 $1.62
5000 $1.49

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

零件号 1 每个绕组的最小电感 (µH) DCR max (Ω) 2 Imp. ratio
pri:sec 3
额定电流 (mA) 插入
损耗 (db)
带宽 (MHz) 色点
Pri Sec Pri Sec
Z9280-AL 9.5 9.5 0.075 0.075 1 : 1 250 0.58 0.25 450 Orange
注释
  1. When ordering, please specify termination and packaging codes: e.g. Z9280-ALC
  2. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  3. Impedance ratio is for the full primary winding to the full secondary winding.

端子:

  • L = RoHS compliant tin-silver-copper over silver-platinum-glass frit.
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

包装:

  • 7" reel, machine-ready 
    EIA-481 embossed plastic tape, special order (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape. Factory order, not stocked (1000 parts per full reel).
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
60 per billion hours / 16,666,667 hours, calculated per Telcordia SR-332

性能曲线

Frequency Response

原理图

z9280s.gif

物理特性

z9280d.gif

All dimensions ±0.005" (±0,127 mm)

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_w.gif
250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,83 0,34
* Special order

一般规格

核心材料:
Ferrite
重量:
0.4 g
包装:
250/7″ reel; 1000/13″ reel; Plastic tape: 16 mm wide, 0.343 mm thick, 12 mm pocket spacing, 4.83 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品

相关产品系列