## 站点设定

##### 货币设定

Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors
Quality

3D Model Datasheet

# MSD1583-154

## 规格

Electrical specifications at 25°C.

### 反激式应用

(Hover for schematics)

(公差: ±10%)
DCR (Ω) 3 隔离

(nH) 5

typ max
MSD1583-154KE_ 150 0.34 0.38 500 700 1 : 1

### SEPIC应用

(Hover for schematics)

(公差: ±10%)
DCR (Ω) 3 SRF typ (MHz) 4 耦合系数 漏电感
(nH) 5
Isat (A) 6 Irms (A)
typ max 10% drop 20% drop 30% drop 两个绕组 7 一个绕组 8
MSD1583-154KE_ 150 0.34 0.38 3.7 >0.99 700 3.0 3.4 3.8 1.1 1.5

1. When ordering, please specify termination and packaging codes: e.g. MSD1583-105KEC
2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
3. DCR is for each winding. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
4. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
5. Leakage inductance is for L1 and is measured with L2 shorted.
6. Isat: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
7. Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.
8. Irms, one winding: Current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

#### 端子:

• E = Halogen free component. RoHS compliant matte tin over nickel over phos bronze terminations.
• Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)

#### 包装:

• D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel).
• B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added (\$25 charge), use code letter D instead.

–40°C to +85°C with (40°C rise) Irms current

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

+125°C (ambient + temp rise)

## 卷装规格

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T
300 330 100 13 38,4 32,4 32 24 4 2 8,6 0,5

## 一般规格

Ferrite

3.7 – 4.4 g

300/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 24 mm pocket spacing, 8.6 mm pocket depth.
Winding to Winding Isolation:
500 Vrms, one minute

## 焊接/清洗

1 (unlimited floor life at <30°C / 85% relative humidity)

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

PCB清洗: