站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

SBU9 Series

Common Mode Chokes

符合RoHS
  • Low profile (9.2 mm high), surface mount design
  • Ideal for switching power supplies
  • Eliminates most line conducted common mode noise
  • Refer to Designing Common Mode Filters for design guidance.
  • RoHS-compliant. 260°C compatible. Tin-silver over copper terminations.

立即购买:
计数 单价
1 $2.44
350 $1.97
700 $1.35
1400 $1.04
2800 $0.91
5000 $0.83

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 1 线组数 共模
峰值阻抗 (kΩ)
最小
电感 (mH) 2
Irms (A) 3 DCR max (Ω) 4 隔离
电压 (Vrms) 5
SBU9-103R25L_ 2 94.40 @ 230 kHz 10 0.25 2.5 1500
SBU9-2820R5L_ 2 26.31 @ 570 kHz 2.8 0.50 0.70 1500
SBU9-1320R7L_ 2 12.68 @ 900 kHz 1.3 0.70 0.38 1500
SBU9-6011R0L_ 2 6.66 @ 1300 kHz 0.60 1.0 0.20 1500
注释
  1. When ordering, please specify packaging code: e.g. SBU9-6011R0LC
  2. Inductance tested at 1 kHz, 1 Vrms, and it is measured on Agilent/HP 4263B LCR meter or equivalent.
  3. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  4. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  5. Interwinding isolation (hipot) tested for one minute.

端子:

  • RoHS compliant tin-silver over copper.

包装:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (350 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Attenuation (Ref 50 Ohms)

Impedance

原理图

schematic.png

物理特性

sbu9d.png
dims_inches_mm.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T
350 178/330 60/100 13 38,4 32,4 32 20 4 2 8,5 0,5

一般规格

核心材料:
Ferrite
重量:
2.4 – 2.7 g
包装:
350/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 8.5 mm pocket depth

清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品族