View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D Model

DFC1210-122

Name: DFC1210-122RC
Brand: Coilcraft
SKU: DFC1210-122RC
Price: 0.33 USD
Availability: InStock

DFC1210-122RC

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$0.63
100	$0.42
250	$0.39
750	$0.37
1000	$0.33
2500	$0.31
5000	$0.30

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1	라인	Common mode impedance typ (Ω)	인덕턴스 (µH) 2	Irms (A)			DCR max (mΩ) 6	절연 전압 (Vrms) 7
부품 번호 1	라인	Common mode impedance typ (Ω)	인덕턴스 (µH) 2	at 25°C 3	at 85°C 4	at 125°C 5	DCR max (mΩ) 6	절연 전압 (Vrms) 7
DFC1210-122RC	2	275 @ 100 MHz	1.2	1.7	1.5	1.15	90	250

메모

When ordering, please specify packaging code: e.g. DFC1210-182RC
Inductance is measured at 100 kHz, 0.1 Vrms, 0 ADC on an Agilent 4263B (or equivalent). Inductance tolerance is –30% +50%.
Current that causes a 40°C rise at 25°C.
Current that causes a 40°C rise at 85°C.
Current that causes a 25°C rise at 125°C.
DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent). For other operating temperatures, use this DCR at Temperature calculator.
353 VDC / 250 Vrms, one minute isolation (hipot) measured between primary and secondary.

종단 처리:

R = RoHS compliant matte tin over nickel over silver-palladium-glass frit

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+150°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation vs Frequency (Common Mode)

Impedance vs Frequency (Common Mode)

Attenuation vs Frequency (Differential Mode)

Impedance vs Frequency (Differential Mode)

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
750	3000*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,72	0,25

*Special order

일반 사양

코어 소재:

Ferrite

중량:

70 mg

패키지:

750/7″ reel; 3000/13″ reel; Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 2.72 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

창고

언어 설정

통화 설정

DFC1210-122

DFC1210-122RC

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

Attenuation vs Frequency (Common Mode)

Impedance vs Frequency (Common Mode)

Attenuation vs Frequency (Differential Mode)

Impedance vs Frequency (Differential Mode)

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품

DFC1210-681

DFC1210-182

관련 제품 시리즈

BU Series

CD1479-AL Common Mode Choke

CD1480-BL Common Mode Choke

CMH, CMV Series

CE1755-AL Common Mode Choke

CMA Family

CE1759-AL Common Mode Choke

CE2439L Common Mode Choke

DFC7045 Series

CF2638L Common Mode Choke

CF2805-AL Common Mode Choke

LPD5030V Series

CF3094-AL Common Mode Choke

SBU9 Series

CG3333-AL Common Mode Choke

Toroidal Common Mode Line Chokes

CG3528-AL Common Mode Choke

CMT Series

CG3885-AL Common Mode Choke

G6252-AL

CH4659-AL Common Mode Choke

Common Mode Line Chokes

CJ5094-CL Common Mode Choke

Common Mode Line Chokes

CM6518-AL Common Mode Choke

CR7915-AL Common Mode Choke

CV9172-AL SM Common Mode Choke

경고