XGL4018 Series

Ultra-Low Loss Shielded Power Inductors

The revolutionary XGL4018 Series by Coilcraft is the epitome of cutting-edge power inductors. Unleash the potential of your DC-DC converters with unparalleled efficiency and performance. Engineered to perfection, these molded power inductors redefine industry standards with their astonishingly low DC and AC losses.

From frequencies spanning hundreds of kHz to an impressive 5+ MHz, experience an unrivaled level of precision. But that's not all! These marvels boast an extended range of inductance values, empowering you to customize your applications to perfection.

With the XGL4018 Series, Coilcraft has once again raised the bar, offering a unique blend of innovation, versatility, and exceptional quality that sets it apart from the rest. Upgrade to excellence today!

Industry's lowest DCR and ultra-low AC losses
Superior current handling with soft saturation characteristics
Wide inductance range up to 4.7 µH
AEC-Q200 Grade 1 (-40°C to +125°C)
RoHS-compliant, halogen free. 260°C compatible. Tin-silver (96.5/3.5) over copper terminations

今すぐ購入:

部品番号

部品を検索

個数	単価
1	$1.98
100	$1.73
250	$1.30
500	$0.78
1000	$0.61
3000	$0.53
5000	$0.48

大量のご注文または在庫のない商品については、お見積もりをご依頼ください。

Termination

E = Tin-silver (96.5/3.5) over copper

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 在庫あり、即日出荷可能.

サンプルを依頼:

部品番号

部品を検索

デザイナーズキット:

キット	値	価格
C508	13 (3 of each)	$45.00
C509	49 (3 of each)	$125.00

仕様

Electrical specifications at 25°C. Operating voltage 0 - 80 V

部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
部品番号 1	インダクタンス (µH) 2 (公差: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
XGL4018-121MEC	0.12	1.6	2.0	255	9.9	17.4	24.5	19.5	27.2
XGL4018-221MEC	0.22	2.6	3.2	155	6.7	11.1	16.1	15.6	21.7
XGL4018-271MEC	0.27	3.3	4.0	135	6.6	10.5	14.7	13.0	18.4
XGL4018-361MEC	0.36	4.3	5.2	105	5.0	8.3	12.0	11.9	16.4
XGL4018-471MEC	0.47	5.1	6.1	95	4.9	8.1	11.4	11.0	15.2
XGL4018-561MEC	0.56	6.8	8.2	85	4.2	7.2	10.3	9.3	12.9
XGL4018-681MEC	0.68	7.4	8.9	75	4.1	6.7	9.4	8.8	12.4
XGL4018-821MEC	0.82	9.7	11.6	70	3.4	5.7	8.3	7.7	11.0
XGL4018-102MEC	1.0	10.7	12.9	60	3.4	5.6	7.8	7.3	10.4
XGL4018-152MEC	1.5	17.3	20.8	48	2.7	4.4	6.4	6.0	8.2
XGL4018-222MEC	2.2	25.9	31.1	38	2.3	3.6	5.0	5.0	6.8
XGL4018-332MEC	3.3	40.1	48.1	30	1.7	2.8	4.0	3.8	5.2
XGL4018-472MEC	4.7	57.8	69.4	25	1.5	2.4	3.4	3.3	4.5

メモ

When ordering, please specify termination and packaging codes: e.g. XGL4018-472MEC
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperature use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent
Isat: DC current at 25°C that causes the specified inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions.

終端処理:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

パッケージ:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked.

環境

環境:

RoHS準拠 , ハロゲンフリー

周囲温度範囲:

−40°C to +125°C with (40°C rise) Irms

保管温度範囲:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

最大部品温度:

+165°C (ambient + temp rise).

時間内の障害（FIT）/平均障害間隔（MTBF）:

See FIT/MTBF Calculations

性能曲線

物理的特徴

テープ＆リール仕様

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
1000	3500*	178/330	60/100	13	18,4	12,4	12	8	4	2	2,3	0,23

* Special order

一般仕様

コア材料:

Composite

重量:

0.16 - 0.17 g

パッケージ:

1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth

はんだ付け/洗浄

湿度感度レベル（MSL）:

1 (unlimited floor life at <30°C / 85% relative humidity)

はんだに対する耐熱性:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

はんだ付けする前に、 Coilcraftコンポーネントのはんだ付けを参照してください。

PCB洗浄:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

XGL4018 Series

Ultra-Low Loss Shielded Power Inductors

仕様

終端処理:

パッケージ:

性能曲線

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品シリーズ

XGL3014 Series

XGL3512 Series

XGL3509, XGL3510 Series

XGL3515 Series

XGL3520 Series

XGL3530 Series

XGL4012 Series

XGL4015 Series

XGL4020 Series

XGL4025 Series

XGL4030 Series

XGL4040 Series

XGL5020 Series

XGL5030 Series

XGL5050 Series

XGL6030 Series

XGL6020 Series

XGL6060 Series

XGL1313 Series

XGL1010 Series

XGL1060 Series

XGL1712 Series

関連製品ファミリー

XEL

XAL

XFL

XAR

EPL

PFL

倉庫

言語の設定

通貨の設定

XGL4018 Series

Ultra-Low Loss Shielded Power Inductors

選択された構成はご購入いただけません

仕様

終端処理:

パッケージ:

性能曲線

物理的特徴

テープ＆リール仕様

一般仕様

はんだ付け/洗浄

関連製品シリーズ

XGL3014 Series

XGL3512 Series

XGL3509, XGL3510 Series

XGL3515 Series

XGL3520 Series

XGL3530 Series

XGL4012 Series

XGL4015 Series

XGL4020 Series

XGL4025 Series

XGL4030 Series

XGL4040 Series

XGL5020 Series

XGL5030 Series

XGL5050 Series

XGL6030 Series

XGL6020 Series

XGL6060 Series

XGL1313 Series

XGL1010 Series

XGL1060 Series

XGL1712 Series

関連製品ファミリー

XEL

XAL

XFL

XAR

EPL

PFL

警告