Datasheet 3D Model

Isolation Transformer

Developed to work with Texas Instruments SN6501 Transformer Driver for Isolated Power Supplies
Mounted on the Texas Instruments SN6501xEVM Evaluation Modules used to analyze the SN6501 oscillator/power driver
Center tapped primary and secondary
Designed to meet UL/CSA/IEC 60950 Basic Insulation with 1.5 mm creepage and clearance.

지금 구매:

개수	단품 가격
1	$5.18
300	$4.17
600	$2.50
1200	$1.96
2400	$1.67
5000	$1.54

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

통상적인 적용 분야

Texas Instruments SN6501와(과) 호환

입력 전압	일차 전압	이차 전압	전력 1
3 V — 5.5 V	3.3 V	5 V	2 W

사양

Electrical specifications at 25°C.

부품 번호 2 (Hover for schematics)	인덕턴스 최소 (µH) 3	DCR max 4		누설 인덕턴스 최대 (µH) 5	권수비	전압시간적 (V-µs) 6	절연 전압 (Vrms) 7
부품 번호 2 (Hover for schematics)	인덕턴스 최소 (µH) 3	Pri (Ω)	Sec (mΩ)	누설 인덕턴스 최대 (µH) 5	Pri : Sec	전압시간적 (V-µs) 6	절연 전압 (Vrms) 7
MA5632-ALD	17.8	0.086	219.000	0.464	1 : 2	17.6	2500

메모

Calculated output power based on 150 kHz operating frequency. Power varies depending on application.
When ordering, please specify termination and packaging codes: e.g. MA5632-ALD
Inductance is tested between pins 4 and 3 at 500 kHz, 0.5 Vrms, 0 Adc.
DCR is per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Leakage inductance is for the primary with both windings connected in series and with the secondary windings shorted.
Based on Bsat of the core at 25°C and number of turns on winding 4-3.
2500 Vrms, one minute primary to secondary isolation.

종단 처리:

L = RoHS compliant tin-silver over tin over nickel over phos bronze.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine ready reel. EIA-481 embossed plastic tape (600 per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	330	100	13	30,4	24,4	24	16	4	2	6,1	0,37

일반 사양

코어 소재:

Ferrite

중량:

0.98 g

패키지:

600/13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 16 mm pocket spacing, 6.1 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

Isolation Transformer

통상적인 적용 분야

사양

종단 처리:

패키지:

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

Transformers