View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

Datasheet 3D Model TLVR Multiphase Magnetics

SLV1211-700

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호	인덕턴스 (nH) 1 (허용 오차: ±10%)	DCR ± 10% (mΩ) 2		SRF typ (MHz)	Isat (A) 3			Irms (A) 4
부품 번호	인덕턴스 (nH) 1 (허용 오차: ±10%)	Pri	Sec	SRF typ (MHz)	at 25°C	at 100°C	at 125°C	20°C rise	40°C rise
SLV1211-700KED	70	0.125	0.41	183	152	133	126	43	60

메모

Inductance at 100 kHz, 0.1 Vrms, 0 Adc.
DCR is measured on a micro-ohmmeter at points indicated in the diagram below.
Isat: DC current that causes a 20% (typ) inductance drop from its value without current. Temperature derating curves.
Irms: Current applied to the primary winding (pins 1 – 4) that causes the specified temperature rise from a 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions. Temperature derating curves.

종단 처리:

RoHS compliant matte tin over nickel over copper.

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (450 parts per reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +85°C with (40°C rise) Irms

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

L vs Current vs Temperature

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
450	330	100	13	30,4	24,4	24	12	4	2	11,45	0,5

일반 사양

코어 소재:

Ferrite

중량:

3.5 – 3.6 g

패키지:

450/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 12 mm pocket spacing, 11.45 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

SLV1211-700