사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

MSD7342 Series

Common Mode Chokes

RoHS 준수 AEC-Q flag
Our MSD7342 Series common mode chokes provide both common mode and differential mode filtering in a single device. They are ideal for use in both power line and signal line applications, providing 200 Vrms, one minute winding-to-winding isolation.
  • Common mode and differential mode filtering in a single device
  • Ideal for use in both power line and signal line applications
  • Up to 230 MHz differential mode cutoff frequency
  • 200 Vrms, one minute winding-to-winding isolation
Refer to Designing Common Mode Filters for design guidance.
지금 구매:
개수 단품 가격
1 $2.82
250 $1.87
500 $1.12
1000 $0.87
2500 $0.75
5000 $0.69

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1 라인 공통 모드
피크 임피던스 (kΩ)
차단
주파수 (MHz) 2
인덕턴스
최소 (µH) 3
Irms (A) 4 DCR max (Ω) 5 절연
전압 (Vrms) 6
MSD7342-252ML_ 2 3.07 @ 59.0 MHz 89.0 2.0 2.17 0.033 200
MSD7342-332ML_ 2 3.86 @ 50.0 MHz 70.0 2.6 2.05 0.037 200
MSD7342-472ML_ 2 4.93 @ 37.0 MHz 55.0 3.8 1.74 0.051 200
MSD7342-562ML_ 2 5.96 @ 34.0 MHz 67.0 4.5 1.57 0.063 200
MSD7342-682ML_ 2 7.85 @ 31.0 MHz 79.0 5.4 1.49 0.070 200
MSD7342-822ML_ 2 9.09 @ 32.0 MHz 55.0 6.6 1.44 0.075 200
MSD7342-103ML_ 2 9.15 @ 24.0 MHz 63.0 8.0 1.24 0.100 200
MSD7342-123ML_ 2 11.85 @ 22.0 MHz 47.0 9.6 1.14 0.120 200
MSD7342-153ML_ 2 14.43 @ 20.0 MHz 53.0 12 1.09 0.130 200
MSD7342-183ML_ 2 18.24 @ 18.0 MHz 38.0 14 0.95 0.170 200
MSD7342-223ML_ 2 18.37 @ 15.0 MHz 49.0 18 0.84 0.220 200
MSD7342-273ML_ 2 25.63 @ 14.0 MHz 42.0 22 0.79 0.250 200
MSD7342-333ML_ 2 26.26 @ 14.0 MHz 41.0 26 0.76 0.270 200
MSD7342-393ML_ 2 35.44 @ 11.0 MHz 42.0 31 0.64 0.380 200
MSD7342-473ML_ 2 34.38 @ 11.0 MHz 38.0 38 0.61 0.420 200
MSD7342-563ML_ 2 41.03 @ 7.9 MHz 40.0 45 0.58 0.460 200
MSD7342-683ML_ 2 70.55 @ 8.5 MHz 52.0 54 0.51 0.600 200
MSD7342-823ML_ 2 84.57 @ 7.4 MHz 26.0 66 0.48 0.680 200
MSD7342-104ML_ 2 89.05 @ 6.6 MHz 24.0 80 0.45 0.770 200
MSD7342-124ML_ 2 101.40 @ 6.4 MHz 22.0 96 0.39 1.030 200
MSD7342-154ML_ 2 121.20 @ 5.2 MHz 19.0 120 0.34 1.350 200
MSD7342-184ML_ 2 141.50 @ 4.6 MHz 20.0 144 0.32 1.520 200
MSD7342-224ML_ 2 133.00 @ 4.8 MHz 25.0 176 0.30 1.720 200
MSD7342-274ML_ 2 103.70 @ 3.6 MHz 18.0 216 0.25 2.410 200
MSD7342-334ML_ 2 131.70 @ 3.8 MHz 9.1 264 0.24 2.700 200
MSD7342-394ML_ 2 145.90 @ 3.1 MHz 11.0 312 0.23 3.050 200
MSD7342-474ML_ 2 187.20 @ 2.7 MHz 11.0 376 0.20 4.000 200
MSD7342-564ML_ 2 204.40 @ 2.6 MHz 8.1 448 0.19 4.430 200
MSD7342-684ML_ 2 210.00 @ 2.4 MHz 3.3 544 0.18 5.000 200
MSD7342-824ML_ 2 251.80 @ 2.1 MHz 6.6 656 0.15 6.800 200
MSD7342-105ML_ 2 276.10 @ 2.1 MHz 5.1 800 0.14 7.800 200
메모
  1. When ordering, please specify termination and packaging codes: e.g. MSD7342-105MLC
  2. Frequency at which the differential mode attenuation equals 3 dB
  3. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
  4. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
  5. DCR is for each winding, measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  6. Interwinding isolation (hipot) tested for one minute.

종단 처리:

  • L = Matte tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

패키지:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape 250 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel)
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with (40°C rise) Irms current
보관 온도 범위:
Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+125°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

schematic.png

물리적 특성

msd7342.png

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T

part_or_ak.gif

250 1000* 178/330 60/100 13 22,4 16,4 16 12 4 2 4,9 0,4
* Special order

일반 사양

코어 소재:
Ferrite
중량:
0.76 – 0.87g
Winding to Winding Isolation:
200 Vrms, one minute

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군