사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

WB3010-PC

WB3010-PCL

RoHS 준수
We will continue to manufacture and support the WB series indefinitely. However, for new designs, consider the SWB, which is a drop-in replacement as an alternative to this series.

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $4.10
100 $3.73
250 $3.10
500 $2.49
1000 $1.98
2500 $1.59
5000 $1.43

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Through hole

부품 번호 1
(Hover for schematics)
권선당 최소 L (µH) 2 DCR max (Ω) Imp. ratio
pri:sec 3
전류정격 (mA) 대역폭 (MHz) 절연
전압 (Vrms)
회로도
Pri Sec Pri Sec
WB3010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 500 C
메모
  1. When ordering surface mount parts, please specify a packaging code: e.g. WB3040-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc
  3. Impedance ratio is for the full primary winding to the full secondary winding.

종단 처리:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

  • D = 13" machine ready reel.
    EIA-481 embossed plastic tape (500 parts per full reel).
  • B = Less than full reel.
    In tape, but not machine ready. To have a leader and trailer added ($25 charge),
    use code letter D instead.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
최고 부품 온도:
+85°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

회로도

A B C
wbts1.gif wbts2.gif wbts3.gif

물리적 특성

wbtd-(1).gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

일반 사양

코어 소재:
Ferrite
중량:
0.37 – 0.39 g
패키지:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품

관련 제품 시리즈