사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

SWB Wideband RF Transformers

RoHS 준수
  • Surface Mount and Through Hole versions
  • 500 Vrms, one minute interwinding isolation (hipot)
  • 250 mA max current rating; 1/4 Watt RF input power
  • For a smaller package size, see our PWB Series

지금 구매:
개수 단품 가격
1 $3.71
50 $3.07
250 $2.31
500 $1.43
1000 $1.28
2500 $1.16
5000 $1.05

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

Through hole

부품 번호 1
(Hover for schematics)
권선당 최소 L (µH) 2 DCR max (Ω) 3 Imp. ratio
pri:sec 4
전류정격 (mA) 대역폭 (MHz) 절연
전압 (Vrms)
회로도
Pri Sec Pri Sec
SWB1010-1-PCL 95 95 0.200 0.200 1 : 1 250 0.04 175 500 A
SWB1010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 500 A
SWB1015-PCL 80 51 0.145 0.130 1.5 : 1 250 0.1 150 500 A
SWB1040-PCL 95 25 0.160 0.115 4 : 1 250 0.2 300 500 A
SWB2010-1-PCL 95 95 0.200 0.200 1 : 1 250 0.04 175 500 B
SWB2010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 500 B
SWB2040-PCL 95 25 0.160 0.115 4 : 1 250 0.2 300 500 B
SWB3010-1-PCL 95 95 0.200 0.200 1 : 1 250 0.04 175 500 C
SWB3010-PCL 780 780 0.320 0.320 1 : 1 250 0.005 100 500 C
SWB3015-PCL 80 51 0.145 0.130 1.5 : 1 250 0.1 150 500 C
SWB3040-PCL 95 25 0.160 0.115 4 : 1 250 0.2 300 500 C

Surface mount

부품 번호 1
(Hover for schematics)
권선당 최소 L (µH) 2 DCR max (Ω) 3 Imp. ratio
pri:sec 4
전류정격 (mA) 대역폭 (MHz) 절연
전압 (Vrms)
회로도
Pri Sec Pri Sec
SWB1010-1-SML_ 95 95 0.200 0.200 1 : 1 250 0.04 175 500 A
SWB1010-SML_ 780 780 0.320 0.320 1 : 1 250 0.005 100 500 A
SWB1015-SML_ 80 51 0.145 0.130 1.5 : 1 250 0.1 150 500 A
SWB1040-SML_ 95 25 0.160 0.115 4 : 1 250 0.2 300 500 A
SWB2010-1-SML_ 95 95 0.200 0.200 1 : 1 250 0.04 175 500 B
SWB2010-SML_ 780 780 0.320 0.320 1 : 1 250 0.005 100 500 B
SWB2040-SML_ 95 25 0.160 0.115 4 : 1 250 0.2 300 500 B
SWB3010-1-SML_ 95 95 0.200 0.200 1 : 1 250 0.04 175 500 C
SWB3010-SML_ 780 780 0.320 0.320 1 : 1 250 0.005 100 500 C
SWB3015-SML_ 80 51 0.145 0.130 1.5 : 1 250 0.1 150 500 C
SWB3040-SML_ 95 25 0.160 0.115 4 : 1 250 0.2 300 500 C
메모
  1. When ordering surface mount parts, please specify a packaging code: e.g. SWB3040-1-SMLD
    Through-hole parts are packaged 70 per tube and do not require a packaging code when ordering.
  2. Inductance tested at 130 kHz, 0.1 Vrms, 0 Adc
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Impedance ratio is for the full primary winding to the full secondary winding.

종단 처리:

  • RoHS-compliant. Matte tin over nickel over phos bronze. Other terminations available at additional cost.

패키지:

  • D = 13″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C
Packaging: –40°C to +80°C
최고 부품 온도:
+85°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Attenuation vs Current

Frequency Response

Frequency Response

Frequency Response

Frequency Response

회로도

SWB10xx SWB20xx SWB30xx
wbts1.gif wbts2.gif wbts3.gif

물리적 특성

swbd.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl-(1).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_u.gif
500 (SMT parts)* 330 100 13 30,4 24,4 24 20 4 2 6,6 0,45
* Through-hole parts are packaged 70 per tube.

일반 사양

코어 소재:
Ferrite
중량:
0.37 – 0.39 g
패키지:
(SM version): 500 per 13″ reel; Plastic tape: 24 mm wide, 0.45 mm thick, 20 mm pocket spacing, 6.6 mm pocket depth; (TH version): 70 per tube

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품 시리즈