사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Surface Mount

Wideband RF Transformers

These products are not available in RoHS-compliant versions. Product contains lead. Contact Coilcraft for current status.
  • Wide frequency range: 0.26 MHz to 1 GHz
  • 250 mA max current rating
  • Applications include impedance matching, voltage or current transformation, DC isolation, balanced/unbalanced mixing, matching, power splitting, coupling and signal inversion

지금 구매:
개수 단품 가격
1 $2.11
500 $1.89
1000 $1.65
5000 $1.43

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C. Measurements are referenced to 50 Ohms.

부품 번호 1
(Hover for schematics)
권선당 최소 L (µH) 2 DCR max (mΩ) 3 Imp. ratio
pri:sec
전류정격 (mA) 삽입
손실 (db)
대역폭 (MHz)
Pri Sec Pri Sec
A9899-A 18.0 18.0 230.0 310.0 1 : 1 250 0.6 0.26 930
A9900-A 7.0 7.0 200.0 200.0 1 : 1 250 1.2 0.525 1000
Z9169-A 1.8 1.8 35.0 40.0 1 : 1 250 1.2 3 1000
메모
  1. When ordering, please specify a packaging code: e.g. A9899-AC
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4192 or equivalent.
  3. DCR measured on a micro-ohmmeter at 25°C. For other operating temperatures, use this DCR at Temperature calculator.

종단 처리:

  • Tin-lead over silver-platinum-glass frit

패키지:

  • 1000/13″ reel; Plastic tape: 16 mm wide, 0.34 mm thick, 12 mm pocket spacing, 4,83 mm pocket depth.
환경
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +85°C
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Frequency Response

회로도

z9169s.gif

물리적 특성

z9169d.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_o.gif
1000 /330 100 13 22,4 16,4 16 12 4 2 4,83 0,34

일반 사양

코어 소재:
Ferrite
중량:
168 mg
패키지:
1000/13″ reel; Plastic tape: 16 mm wide, 0.34 mm thick, 12 mm pocket spacing, 4,83 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품 시리즈