View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

3D Model Datasheet

CST2010V Series

SMT Current Sense Transformers

High isolation voltage CST2010 current sense transformer
Sensed current up to 40 A
Designed for use up to 1 MHz and above
2100 Vrms, one minute isolation (hipot) between windings
AEC-Q200 Grade 1 (−40°C to +125°C)
Designed to comply with IEC61558-1, IEC62369-1, and IEC60664-1 for providing Reinforced or Basic Insulation
- 5.5 mm creepage and 5.0 mm clearance to meet reinforced insulation for working voltage up to 136 V and basic insulation for working voltage up to 550 V with material group 3, pollution degree P2, OVCII, and altitude up to 2 km.

지금 구매:

개수	단품 가격
1	$2.93
250	$2.50
500	$2.20
1000	$1.90
2500	$1.62
5000	$1.49

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 (Hover for schematics)	인덕턴스 @ 0A (mH) 1 (허용 오차: ±30%)	DCR max (Ω) 2		권수비	전압시간적 (V-µs) 3	주파수 (kHz) 4	전류 (A) 5	종단 저항 R_T (Ω) 6	절연 전압 (Vrms) 7
부품 번호 (Hover for schematics)	인덕턴스 @ 0A (mH) 1 (허용 오차: ±30%)	Pri	Sec	Pri : Sec	전압시간적 (V-µs) 3	주파수 (kHz) 4	전류 (A) 5	종단 저항 R_T (Ω) 6	절연 전압 (Vrms) 7
CST2010V-150LD	19	0.00036	3.6	1 : 150	381	1 — >1000	40	3.8	2100

메모

Inductance measured between secondary pins at 1 kHz, 0.1 Vrms, 0 Adc.
DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
Volt-time product is for the secondary, between pin 2 and 4.
For specific questions regarding frequency range, please contact us at [email protected].
Primary current of 40 A causes approximately 40°C temperature rise from 25°C ambient. Higher current causes a greater temperature rise (see Temperature Rise vs Current curve).
Terminating resistance (R_T) value is based on 1 Volt output with 40 Amps flowing through the primary. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation:
R_T= V_out × N_sec / I_in.
2100 Vrms, one minute isolation (hipot) winding to winding.

종단 처리:

RoHS compliant tin-silver over tin over nickel over phos bronze (pins 2-4);
RoHS compliant matte tin over nickel over copper (pins 11-12)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C

보관 온도 범위:

Component: –40°C to +165°C.
Tape and reel Packaging: –40°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
250	330	100	13	38,4	32,4	32	20	4	2	11,2	0,5

일반 사양

코어 소재:

Ferrite

중량:

3.8 g

패키지:

250/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 11.2 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More Info.

CST2010V Series

SMT Current Sense Transformers

사양

종단 처리:

패키지:

성능 곡선

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1, CST2 – High Frequency

CST1211 Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

창고

언어 설정

통화 설정

CST2010V Series

SMT Current Sense Transformers

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

회로도

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

CS2106 50/60 Hz Current Sense Transformer

High Frequency Current Sense Transformers

CS60 Series

CS60-010

CST1, CST2 – High Frequency

CST1211 Series

CST3015 Series

CST2010 Series SMT

CST2020 Series

CST4835 Series

CST7030 Series

CU8965-AL

D18XX, CS1XXX Series

SCS Series

경고