사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PL160 Series

SMT Planar Transformers

RoHS 준수 AEC-Q flag
  • Rated for 160 Watts between 200 kHz and 700 kHz with a nominal 48 V input.
  • High efficiency; excellent DCR; very low leakage inductance
  • AEC-Q200 Grade 1 (−40°C to +125°C)
  • Provides 0.009 inch (0.229 mm) clearance above the seating plane
  • Can be special ordered with an optional auxiliary winding
  • For 300 Watt planar transformers, consider the PL300 Series
  • RoHS-compliant. 260°C compatible. Matte tin over nickel over brass terminations
  • Two samples of each PL160 and PL300 parts are available in Coilcraft Designer's Kit C460

지금 구매:
개수 단품 가격
1 $15.33
100 $12.82
250 $10.24
500 $8.92

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C460 10 (2 of each) $60.00

사양

Electrical specifications at 25°C.

부품 번호 1
(Hover for schematics)
전력 (W) 입력 전압 (V) 인덕턴스
최소 (µH) 2
DCR max (mΩ) 3 누설
인덕턴스
최대 (nH) 4
권수비 전압시간적
(V-µs) 5
절연
전압 (Vrms)
Pri1 Pri2 Sec Pri1 : Sec
PL160-100L 160 36 72 246 14.7 14.7 6.8 350 1 : 0.5 150 1500
PL160-101L 160 36 72 312 14.7 18.5 6.8 400 1 : 0.44 168 1500
PL160-102L 160 36 72 378 18.5 18.5 6.8 450 1 : 0.4 187 1500
PL160-103L 160 36 72 449 18.5 21.5 6.8 550 1 : 0.36 206 1500
PL160-104L 160 36 72 534 21.5 21.5 6.8 550 1 : 0.33 224 1500
메모
  1. When ordering, please specify packaging code: e.g. PL160-104LD
  2. Inductance measured on an Agilent/HP 4284 at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5 with pins 3 and 4 connected.
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator. DCR for secondary is measured between pins 7 and 11.
  4. Leakage inductance measured at 200 kHz, 0.5 Vrms, 0 Adc between pins 2 and 5, with pins 3 and 4 connected, and with all secondary pins shorted
  5. Volt-time product is based on primary windings connected in series.

종단 처리:

  • Matte tin over nickel over brass.

패키지:

  • Blank In trays, 36 per tray
  • D = Optional tape and reel (additional cost). Factory order only, not stocked. 13″ machine-ready reel. EIA-481 embossed plastic tape. 250/13″ reel plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 9.78 mm pocket depth. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). To order a transformer with an optional auxiliary winding, add an “X” and the turn count after the PL160, e.g. PL160X3-100LB. Turn counts of 2, 3, 4, 5, 7 and 9 are available for the auxiliary winding. Transformers with auxiliary windings are not stocked.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C
Tray packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

pl160s-(1).gif

물리적 특성

pl160d.gif
dims_inches_mm.gif

일반 사양

코어 소재:
Ferrite
중량:
12.0 – 12.8 g
패키지:
36 per tray

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품 시리즈