사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

132-xxSM Series

Maxi Spring™ Air Core Inductors

RoHS 준수 AEC-Q flag
Our 132-xxSM Series Maxi Spring™ air core inductors have exceptionaly high Q factors and very tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. As their name implies, air core inductors do not use a magnetic core, resulting in high Q and the lowest possible losses for high-frequency applications. High-reliability versions are available for space, military, and other critical applications.
  • Inductance values from 90 nH to 538 nH
  • Exceptionally high Q even at low frequencies
  • Handle up to 3.5 Amps current
  • Tight tolerance (as low as ±2%) can eliminate circuit tuning
  • Flat top case for mechanical stability and reliable pick and place operations
  • Solder coated leads ensure reliable soldering
  • AEC-Q200 Grade 1 (−40°C to +125°C)
지금 구매:
개수 단품 가격
1 $0.93
400 $0.76
800 $0.68
1600 $0.60
2400 $0.40
4800 $0.26
10000 $0.24

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

설계자용 키트:
키트 가격
C319 12 (8 of each) $40.00
C319-2 12 (8 of each) $60.00

사양

Electrical specifications at 25°C.

부품 번호 1 권수 인덕턴스 (nH) 2 허용 오차 (%) 3 Q @ 50.0 MHz SRF min (MHz) 4 DCR max (mΩ) 5 Irms (A) 6
min typ
132-09SM_L_ 9 90 2,5 95 114 1140 15.0 3.5
132-10SM_L_ 10 111 2,5 87 104 1020 15.0 3.5
132-11SM_L_ 11 130 2,5 87 104 900 20.0 3.0
132-12SM_L_ 12 169 2,5 95 114 875 25.0 3.0
132-13SM_L_ 13 206 2,5 95 114 800 30.0 3.0
132-14SM_L_ 14 222 2,5 92 110 730 35.0 3.0
132-15SM_L_ 15 246 2,5 95 114 685 35.0 3.0
132-16SM_L_ 16 307 2,5 95 114 660 35.0 3.0
132-17SM_L_ 17 380 2,5 95 114 590 50.0 2.5
132-18SM_L_ 18 422 2,5 95 114 540 60.0 2.5
132-19SM_L_ 19 491 2,5 95 114 535 65.0 2.0
132-20SM_L_ 20 538 2,5 87 104 490 90.0 2.0
메모
  1. When ordering, please specify tolerance, termination and packaging codes: e.g. 132-20SMJLD
  2. Inductance and Q tested at 50 MHz on an Agilent/HP 4291A with a 16193 fixture and correlation.
  3. Tolerances in bold are stocked for immediate shipment.
  4. SRF tested on the Agilent/HP 8753D and a Coilcraft CCF1248 test fixture.
  5. DCR tested on the Cambridge Technology Model 510 Micro Ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  6. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

허용 오차:

  • = 2%, = 5% (Table above shows stock tolerances in bold.)

종단 처리:

  • L = RoHS compliant tin-silver (96.5/3.5) over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
  • S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

패키지:

  • D = 13″ machine-ready reel.
    EIA-481 embossed plastic tape, 800 parts per full reel. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel.
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C with Irms current
보관 온도 범위:
Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+140°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

L vs Frequency

Q vs Frequency

물리적 특성

maxid.gif
dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_j.gif
800 330 100 13 30,4 24,4 24 12 4 2 6,1 0,3

일반 사양

중량:
0.42– 0.59 g
패키지:
800/13″ reel Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 6.1 mm pocket depth
Temperature coefficient of inductance:
+5 to +70 ppm/°C

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈