사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO6610 Series

Low Profile Surface Mount Power Inductors

RoHS 준수 AEC-Q flag
Coilcraft LPO6610 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve
  • AEC-Q200 Grade 3 (−40°C to +85°C)
지금 구매:
개수 단품 가격
1 $1.37
250 $1.11
500 $0.84
1000 $0.70
5000 $0.57

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C367 16 (3 of each) $50.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (A) 5
LPO6610-122ML_ 1.2 0.080 190 2.1 1.7
LPO6610-152ML_ 1.5 0.10 140 1.9 1.5
LPO6610-222ML_ 2.2 0.12 115 1.6 1.4
LPO6610-332ML_ 3.3 0.16 90.0 1.3 1.2
LPO6610-472ML_ 4.7 0.20 88.0 1.1 1.1
LPO6610-682ML_ 6.8 0.32 66.0 0.90 0.85
LPO6610-103ML_ 10 0.41 55.0 0.80 0.75
LPO6610-153ML_ 15 0.55 42.0 0.65 0.60
LPO6610-223ML_ 22 0.85 38.0 0.50 0.52
LPO6610-333ML_ 33 1.3 29.0 0.40 0.42
LPO6610-473ML_ 47 1.8 22.0 0.35 0.36
LPO6610-683ML_ 68 2.5 18.0 0.30 0.30
LPO6610-104ML_ 100 3.5 14.0 0.25 0.26
LPO6610-154ML_ 150 5.0 12.0 0.18 0.21
LPO6610-224ML_ 220 7.0 10.0 0.16 0.18
LPO6610-334ML_ 330 15.0 8.0 0.13 0.13
메모
  1. When ordering, please specify termination and packaging codes: e.g. LPO6610-334MLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves

종단 처리:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

  • C = 7" machine-ready reel
    EIA-481 embossed plastic tape (1000 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+125°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Frequency

Inductance vs. Current

물리적 특성

lpo6610d-(1).gif

테이프 및 릴 사양

tapereel_pl.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation 
7" (178 mm) A B C D E W P Po P1 H T part_or_aa.gif
1000 178 60 13 18,4 12,4 12 8 4 2 1,2 0,3
‡ Part marking does not indicate polarity

일반 사양

코어 소재:
Ferrite
중량:
91.0 - 95.0 mg
패키지:
1000/7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.2 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군