사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

LPO4812 Series

Low Profile Surface Mount Power Inductors

RoHS 준수 AEC-Q flag
Coilcraft LPO4812 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.
  • Low profile for compact packaging
  • High saturation current ratings
  • Ceramic case for thermal stability
  • Ferrite core for flat L vs I curve
  • AEC-Q200 Grade 3 (−40°C to +85°C)
지금 구매:
개수 단품 가격
1 $1.30
250 $1.05
500 $0.78
1000 $0.65
5000 $0.53

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C357 16 (3 of each) $45.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2 허용 오차 (%) DCR max (Ω) 3 SRF typ (MHz) Isat (A) 4 Irms (A) 5
LPO4812-102ML_ 1.0 20 0.055 270 1.3 0.85
LPO4812-152ML_ 1.5 20 0.080 220 1.0 0.85
LPO4812-222ML_ 2.2 20 0.090 170 0.80 0.85
LPO4812-332ML_ 3.2 20 0.12 140 0.70 0.80
LPO4812-472ML_ 4.7 20 0.16 110 0.60 0.80
LPO4812-682ML_ 6.8 20 0.23 90.0 0.45 0.78
LPO4812-822ML_ 8.2 20 0.27 70.0 0.45 0.77
LPO4812-103KL_ 10 10 0.30 60.0 0.40 0.76
LPO4812-153KL_ 15 10 0.46 50.0 0.32 0.72
LPO4812-223KL_ 22 10 0.64 40.0 0.28 0.59
LPO4812-333KL_ 33 10 0.85 30.0 0.22 0.54
LPO4812-473KL_ 47 10 1.3 28.0 0.20 0.50
LPO4812-683KL_ 68 10 1.8 22.0 0.16 0.39
LPO4812-104KL_ 100 10 2.6 18.0 0.13 0.32
LPO4812-154KL_ 150 10 4.2 14.0 0.10 0.26
LPO4812-224KL_ 220 10 5.5 11.0 0.090 0.24
메모
  1. When ordering, please specify termination and packaging codes: e.g. LPO4812-224KLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

종단 처리:

  • L = Silver-palladium-platinum-glass frit terminations.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

  • C = 7" machine-ready reel 
    EIA-481 embossed plastic tape (1000 per full reel).
  • B = Less than full reel 
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • D = 13" machine-ready reel
    EIA-481 embossed plastic tape. Factory order only, not stocked (3500 per full reel).
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+125°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Current

Inductance vs. Frequency

물리적 특성

lpo4812d.gif
dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl_LPO4812.gif
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation‡
7" (178 mm) 13" (330 mm) A B C D W P Po P1 H T part_or_ac.gif
1000 3500* 178/330 60/100 13 18,4 12 8 4 2 1,3 0,23
* Special order
‡ Part marking does not indicate polarity
 

일반 사양

코어 소재:
Ferrite
중량:
53 - 61 mg
패키지:
1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.3 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
권장 픽앤플레이스 노즐:
OD: 4.6 mm; ID: < 2.3 mm
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군