LPO2506 Series

Low Profile Surface Mount Power Inductors

Coilcraft LPO2506 Series low-profile, unshielded surface-mount power inductors offer low DC resistance and high saturation current ratings in a compact package. The low-profile ceramic case provides thermal stability and an excellent surface for pick-and-place handling.

InBoard® version is only 1,19 mm above board
On-board version is 1,65 mm high
Ceramic case for thermal stability
Ferrite core for flat L vs I curve
AEC-Q200 Grade 3 (−40°C to +85°C)

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.65
250	$1.36
500	$1.06
1000	$0.91
5000	$0.80

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Silver-palladium-platinum-glass frit

Packaging

D = 13" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C332	16 (3 of each)	$60.00
C333	16 (3 of each)	$60.00

사양

Electrical specifications at 25°C.

In-Board Version 부품 번호 1	On-Board Version 부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz)	Isat (A) 4	Irms (A) 5
In-Board Version 부품 번호 1	On-Board Version 부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz)	Isat (A) 4	Irms (A) 5
LPO2506I-472L_	LPO2506O-472L_	4.7	0.15	90.0	1.6	1.9
LPO2506I-682L_	LPO2506O-682L_	6.8	0.17	75.0	1.3	1.7
LPO2506I-822L_	LPO2506O-822L_	8.2	0.20	65.0	1.0	1.5
LPO2506I-103L_	LPO2506O-103L_	10	0.24	60.0	1.0	1.5
LPO2506I-153L_	LPO2506O-153L_	15	0.30	45.0	0.90	1.3
LPO2506I-223L_	LPO2506O-223L_	22	0.42	35.0	0.70	1.0
LPO2506I-333L_	LPO2506O-333L_	33	0.55	30.0	0.60	0.90
LPO2506I-473L_	LPO2506O-473L_	47	0.77	22.0	0.50	0.70
LPO2506I-683L_	LPO2506O-683L_	68	1.1	20.0	0.40	0.60
LPO2506I-104L_	LPO2506O-104L_	100	1.6	15.0	0.30	0.50
LPO2506I-154L_	LPO2506O-154L_	150	2.5	12.0	0.25	0.40
LPO2506I-224L_	LPO2506O-224L_	220	3.7	10.0	0.22	0.32
LPO2506I-334L_	LPO2506O-334L_	330	4.7	8.0	0.18	0.28
LPO2506I-474L_	LPO2506O-474L_	470	6.8	6.5	0.14	0.24
LPO2506I-684L_	LPO2506O-684L_	680	9.2	5.5	0.12	0.20
LPO2506I-105L_	LPO2506O-105L_	1000	14.2	4.5	0.10	0.16

메모

When ordering, please specify termination and packaging codes: e.g. LPO2506I-105LD or LPO2506O-105LD.
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current. Temperature derating curves.
Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

종단 처리:

L = Silver-palladium-platinum-glass frit terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.

환경

환경:

RoHS 준수

주변 온도 범위:

−40°C to +85°C with Irms current

보관 온도 범위:

Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Frequency

Inductance vs. Current

물리적 특성

In-Board Version

On-Board Version

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation‡
Part	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T	or
InBoard	1000	330	100	13	22,4	16,4	16	12	4	2	2,23	0,25
On-Board	1000	330	100	13	22,4	16,4	16	12	4	2	1,8	0,3

‡ Part marking does not indicate polarity

일반 사양

코어 소재:

Ferrite

중량:

240 - 260 mg

패키지:

1000/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPO2506 Series

Low Profile Surface Mount Power Inductors