사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0805PB Series

Wirewound Ferrite Beads

RoHS 준수 할로겐 프리 AEC-Q flag
The 0805PB Series offers exceptional impedance performance and extremely lower DCR that is optimized for high-frequency noise suppression on high current power supply lines, providing superior performance than traditional multilayer ferrite beads. It also features robust mechanical structure, and is AEC-Q200 qualified for use in automotive applications and other harsh environments.
  • Optimized for high-frequency noise suppression on high-current power supply lines
  • Current ratings as high as 4.4 Amps
  • AEC-Q200 qualified
  • Wider spectrum of suppression than traditional ferrite beads
  • Robust mechanical structure for use in automotive applications and other harsh environments

지금 구매:
개수 단품 가격
1 $1.31
200 $0.98
500 $0.75
1000 $0.52
2000 $0.39
4000 $0.29

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2 임피던스, 통상 (Ω) SRF typ (MHz) 4 DCR max (mΩ) 5 Irms (A)
100 MHz 3
(허용 오차: ±20%)
900 MHz 1.7 GHz at 25°C 6 at 85°C 7 at 125°C 8
0805PB-250XMR_ 0.10 25 75 120 3200 12.2 4.40 3.96 2.25
0805PB-101XMR_ 0.40 100 250 400 1800 19.0 3.20 2.88 1.64
0805PB-221XMR_ 0.90 220 700 1000 1100 30.5 3.00 2.70 1.53
0805PB-331XMR_ 1.2 330 1100 1350 950 37.8 2.40 2.17 1.23
0805PB-601XMR_ 2.3 600 1700 1700 680 62.2 1.90 1.70 0.96
0805PB-102XMR_ 3.6 1000 2700 1500 480 139.1 1.40 1.26 0.71
메모
  1. When ordering, please specify termination and packaging codes: e.g. 0805PB-102XMRC
  2. Inductance measured at 100 KHz at 0.1 Vrms, using Coilcraft SMD-A fixture on an Agilent 4263 (or equivalent) without correlation.
  3. Impedance measured at 100 MHz at 0.5 Vrms, using E4982 (or equivalent) with correlation.
  4. SRF is measured on an Agilent 8753ES (or equivalent) with a Coilcraft SMD-D test fixture.
  5. DCR is measured on a Keithley 580 Micro-ohmmeter (or equivalent) with a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  6. Current that cause 40°C rise at 25°C.
  7. Current that cause 40°C rise at 85°C.
  8. Current that cause 15°C rise at 125°C.

종단 처리:

  • R = RoHS compliant matte tin over nickel over silver.
  • Q = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
  • P = non-RoHS tin-lead (63/37) (Special order, added cost)

패키지:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +125°C with Irms current
보관 온도 범위:
Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+140°C (ambient + temp rise). Derating.
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Impedance vs Frequency

물리적 특성

0805pbd.gif
 

A max B max C max D
ref
E
ref
F
ref
G
ref
H
nom
I
nom
J
nom
 
0.086 0.054 0.047 0.006 0.050 0.018 0.048 0.055 0.026 0.066 inches
2,18 1,37 1,20 0,15 1,27 0,46 1,22 1,40 0,66 1,68 mm

테이프 및 릴 사양

tapereel_pl.gif
 

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,3 0,23
* Special order

일반 사양

코어 소재:
Ferrite
중량:
14.0 – 15.5 mg
패키지:
2000/7″reel, 7500/13″reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품 시리즈