사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0805AF (2012) Series

Wirewound Ferrite Beads

RoHS 준수 할로겐 프리
Our 0805AF Series wirewound ferrite beads feature heavy guage wire for high current handling. They are great for RF signal isolation and power supply filtering applications. This series covers a wide range of impedance values from 65 Ohms to 7000 Ohms at 100 MHz and comes with a tight ±5% standard tolerance on all values.
  • Higher performance than other surface mount ferrite beads in the market
  • High impedance across a wide bandwidth; up to GHz band
  • Ferrite construction and heavy gauge wire for high current handling
  • Extremely low DCR for high current applications
  • Eliminates high-frequency noise in power supplies or RF signal isolation applications
지금 구매:
개수 단품 가격
1 $1.19
200 $0.90
500 $0.68
1000 $0.47
2000 $0.35
4000 $0.26
10000 $0.21

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C450 14 (10 of each) $45.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2
(허용 오차: ±5%)
임피던스, 통상 (Ω) SRF typ (MHz) 3 DCR max (Ω) 4 Irms (mA) 5 색상 코드 6
100 MHz 900 MHz
0805AF-111XJR_ 0.11 @ 7.9 MHz 65.6 793 1260 0.05 940 Brown
0805AF-681XJR_ 0.68 @ 7.9 MHz 387 2451 425 0.30 660 Orange
0805AF-102XJR_ 1.0 @ 7.9 MHz 638 1441 355 0.39 650 Yellow
0805AF-122XJR_ 1.2 @ 7.9 MHz 772 1423 375 0.64 440 Brown
0805AF-152XJR_ 1.5 @ 7.9 MHz 942 1519 285 0.74 390 Green
0805AF-182XJR_ 1.8 @ 7.9 MHz 1153 1515 300 0.98 370 Blue
0805AF-222XJR_ 2.2 @ 7.9 MHz 7069 675 105 0.98 350 Brown
0805AF-272XJR_ 2.7 @ 7.9 MHz 2807 26.1 100 1.16 320 Violet
0805AF-332XJR_ 3.3 @ 7.9 MHz 6180 415 85.0 1.20 330 Gray
0805AF-472XJR_ 4.7 @ 7.9 MHz 1259 642 55.0 1.50 280 Black
0805AF-682XJR_ 6.8 @ 7.9 MHz 1092 1010 37.0 1.90 240 Brown
0805AF-103XJR_ 10 @ 2.5 MHz 675 149 26.0 2.20 230 Red
0805AF-153XJR_ 15 @ 2.5 MHz 485 283 20.0 4.25 150 Yellow
0805AF-223XJR_ 22 @ 2.5 MHz 696 542 21.0 6.70 120 Green
메모
  1. When ordering, please specify termination and packaging codes: e.g. 0805AF-223XJRC
  2. Inductance measured at 0.1 Vrms, using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
  3. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
  4. DCR measured at 25°C using a Cambridge Technology Micro-ohmmeter. For other operating temperatures,use this DCR at Temperature calculator.
  5. Irms: Current that causes a 15°C temperature rise from 25°C ambient. Temperature derating curves This information is for reference only and does not represent absolute maximum ratings. Because of their open construction, these parts will not saturate.
  6. Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values.

종단 처리:

  • R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.
  • Q = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • P = non-RoHS tin-lead (63/37)(Special order, added cost)

패키지:

  • C = 7" machine-ready reel
    EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+100°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs. Frequency

Impedance vs. Frequency

물리적 특성

0805afd.gif
 
A max B max C max D ref E F G H I J
0.09 0.068 0.060 0.02 0.05 0.016 0.04 0.07 0.04 0.03 inches
2,29 1,73 1,52 0,51 1,27 0,41 1,02 1,78 1,02 0,76 mm
Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

테이프 및 릴 사양

tapereel_pl.gif


 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 178 60 13 14,4 8,4 8 4 4 2 1,65 0,23

일반 사양

코어 소재:
Ferrite
중량:
16.7– 18.0 mg

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈