사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

SMT Gate Drive Transformer

RoHS 준수
  • Designed for transformer coupled MOSFETand IGBT gate drive circuits
  • Specified by Texas Instruments for its POE+PHYTEREV-I/-E evaluation board
  • Specified by Microsemi for its PD70211EVB51F-12 evaluation board
  • Operating frequency from 50 kHz to 2 MHz
  • Space saving surface mount package
지금 구매:
개수 단품 가격
1 $1.85
350 $1.59
700 $1.39
1400 $1.20

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1
(Hover for schematics)
인덕턴스
최소 (µH) 2
DCR max (Ω) 3 누설
인덕턴스
최대 (µH) 4
권수비 정전용량
max (pF)
SRF min (MHz) 5 전압시간적
(V-µs) 6
주파수 (kHz) 절연
전압 (Vrms) 7
Pri Sec Pri : Sec
FA2659-AL_ 296 0.795 0.655 1.5 1 : 1 21.9 1.4 34.2 50 2000 2250
메모
  1. When ordering, please specify termination and packaging codes: e.g. FA2659-ALC
  2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc.
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary pins shorted.
  5. SRF measured with coils connected in series using an Agilent/HP 4192 or equivalent.
  6. Based on Bsat of the core at 25°C and number of turns of the primary.
  7. 2250 Vdc isolation from primary to secondary.

종단 처리:

  • L = RoHS compliant tin-silver over tin over nickel over phos bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

  • 7" reel, machine-ready 
    EIA-481 embossed plastic tape (175 parts per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape. Factory order only, not stocked (750 parts per full reel).
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +125°C
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

회로도

fa2659s.gif

물리적 특성

fa2659d.gif
dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (330 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_c.gif
175 750* 178/330 60/100 13 30,4 24,4 24 12 4 2 7,0 0,4

일반 사양

코어 소재:
Ferrite
중량:
700 mg
패키지:
175/7″reel; 750/13″ reel Plastic tape: 24 mm wide, 0.4 mm thick, 12 mm pocket spacing, 7.0 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.