사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

Tunable Low Profile

RF Inductors 148 Series

RoHS 준수
  • 0.300″ / 7,6 height is ideal for low profile applications
  • Windings are precision molded into plastic for mechanical and electrical stability
  • Threaded Carbonyl J core with a slotted socket
  • Extremely economical, even in small quantities
  • RoHS-compliant. Tin-silver over copper terminations.
  • Samples of all values are available in Coilcraft Designer's Kit M304
  • Tune with our handy 3-in-1 "TriTuner" tuning tool
지금 구매:
개수 단품 가격
1 $2.85
100 $2.34
250 $1.64
500 $1.21
1000 $0.86
2500 $0.51
5000 $0.38

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

설계자용 키트:
키트 가격
M304 33 (3 of each) $60.00

사양

Electrical specifications at 25°C.

부품 번호 1 색상 권수 인덕턴스 (nH) 2 테스트 주파수
(MHz)
Q min
at L nom 3
SRF min (MHz)
공심
nom
min 4 nom max
148-01J12L Brown 35 38 39 40 50.0 88 3200
148-02J12L Red 44 46 52 58 50.0 96 1560
148-03J12L Orange 56 60 73 86 50.0 106 1200
148-04J12L Yellow 74 77 101 125 50.0 112 980
148-05J12L Green 92 96 130 164 50.0 112 820
148-06J12L Blue 114 120 170 220 50.0 112 720
148-07J12L Violet 142 154 222 290 50.0 110 620
148-08J12L Gray 168 176 262 346 25.0 106 570
148-09J12L White 198 208 310 410 25.0 104 490
148-10J12L Black 10½ 237 250 375 500 25.0 90 450
148-11J12L Brown 11½ 276 290 435 580 25.0 84 410
148-12J12L Red 12½ 315 338 500 666 25.0 66 350
148-13J12L Orange 13½ 344 362 540 710 25.0 64 320
메모
  1. To order fixed inductance parts without cores, eliminate the “J12”, e.g. 148-13L.
  2. Inductance readings taken at test frequency on an Agilent/HP 4342A Q meter with 1/2″ long, 16 AWG tinned copper wire soldered along the leads and bent at 90°, 1/4″ from standoffs. Inductance values at 50 MHz calculated from Cp readings. Inductance values at 25 MHz read at standard Q meter frequency (blue line)
  3. Q readings taken at test frequency on an Agilent/HP 4342A Q meter with 1/2″ long, 16 AWG tinned copper wire soldered along the leads and bent at 90°, 1/4″ from standoffs.
  4. L min measured with core halfway out top of form. L max measured with core centered in the windings.

종단 처리:

  • Tin-silver over copper
환경
환경:
RoHS 준수
주변 온도 범위:
−40°C to +85°C
보관 온도 범위:
Component: −40°C to +85°C
Packaging tubes: −40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

물리적 특성

148d.gif
dims_inches_mm.gif

일반 사양

코어 소재:
Carbonyl J. Core length: 0.375 in / 9,5 mm
중량:
0.7 – 1.2 g
패키지:
30 per tube

납땜/세척

납땜 열 내성:
Wave solder only. Recommended maximum board surface temperature of 168°C (334°F) for no more than three seconds. Pre-heating is recommended to minimize time over the solder nozzle.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.