사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0201AF (0603)

Ferrite Chip Inductors

RoHS 준수 할로겐 프리
Our 0201AF Series wirewound ferrite core chip inductors offer very high inductance values in 0201 size – up to 200 nH. They are optimized for RF isolation in applications ranging from 900 MHz to 9 GHz. The low-loss ferrite construction creates high impedance, high current handling, and low DCR in a tiny package.
  • Optimized for RF isolation in applications ranging from 900 MHz to 9 GHz
  • High inductance values for 0201 inductors, up to 200 nH
  • Ferrite construction for high impedance and high current handling
  • Low DCR – as low as 0.15 Ohms
  • Low losses for low frequency filter applications
지금 구매:

The part number you have selected is not available through our online store.

Please click the "Request Quote" button for pricing and more information.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C471 8 (20 of each) $45.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (nH) 2
(허용 오차: ±10%)
임피던스, 통상 (Ω) SRF typ (GHz) 3 DCR max (Ω) 4 Irms (mA) 5
700 MHz 900 MHz 1.7 GHz
0201AF-330XKR_ 33 135 170 345 3.4 0.15 340
0201AF-510XKR_ 51 200 255 480 2.9 0.30 280
0201AF-680XKR_ 68 270 350 750 2.6 0.33 220
0201AF-910XKR_ 91 335 425 830 2.4 0.37 200
0201AF-111XKR_ 110 465 625 1560 2.1 0.48 170
0201AF-141XKR_ 140 530 680 1380 2.0 0.65 160
0201AF-171XKR_ 170 680 890 1910 1.9 0.86 140
0201AF-201XKR_ 200 850 1130 2620 1.7 1.3 110
메모
  1. When ordering, please specify packaging code: e.g. 0201AF-201XKRW
  2. Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
  3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft SMD -D test fixture.
  4. DCR measured on Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  5. Irms: Current that causes a 15°C temperature rise from 25°C ambient. Because of their open construction, these parts will not saturate. This information is for reference only and does not represent absolute maximum ratings.

종단 처리:

  • RoHS compliant matte tin over nickel over silver-platinumglass frit.

패키지:

  • W7" machine-ready reel
    EIA-481 punched paper tape (2000 parts per full reel).
  • U = Less than full reel
    In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead.
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+100°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

L vs Frequency

Z vs Frequency

물리적 특성

0201afd.gif

A max B max C max D E F G  
0.023 0.014 0.018 0.004 0.009 0.007 0.018 inches
0,58 0,36 0,46 0,10 0,23 0,18 0,46 mm

테이프 및 릴 사양

tapereel_pa.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) A B C D E W P Po P1 H T part_or_i-(1).gif
2000 178 100 13 14,4 8,4 8 2 4 2 NA 0,68

일반 사양

코어 소재:
Ferrite
중량:
0.12 – 0.20 mg
패키지:
2000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 2 mm pocket spacing
Temperature coefficient of inductance:
+25 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info

관련 제품 시리즈