Datasheet 3D Model SPICE S-Param Spice 모델

016008F (0402)

Ferrite Chip Inductors

The 016008F series is the world’s smallest wirewound ferrite chip inductor, designed for high-frequency applications where board space is constrained. With dimensions of just 0.5 x 0.25 x 0.38 mm, it achieves the breakthrough miniaturization without compromising high-impedance performance. The high impedance provides excellent RF isolation in cellular and wireless applications, while a DCR as low as 0.18 Ohms makes it ideal for RF choke and filtering applications. This enables compact devices such as smartphones, IoT modules, and wearables to achieve superior EMI suppression and signal integrity.

World’s smallest high-frequency-wirewound chip inductor
High inductance values in 016008 package (metric 0402)
Exceptionally low DCR – lower than all thin film type
Inductance values up to 120 nH

지금 구매:

부품 번호

내 부품 찾기

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C522	7 (20 of each)	$45.00

사양

Electrical specifications at 25°C.

부품 번호	인덕턴스 (nH) 1 (허용 오차: ±10%)	임피던스, 통상 (Ω) 2			SRF typ (GHz) 3	DCR max (mΩ) 4	Irms (mA)
부품 번호	인덕턴스 (nH) 1 (허용 오차: ±10%)	100 MHz	900 MHz	1.7 GHz	SRF typ (GHz) 3	DCR max (mΩ) 4	at 25°C 5	at 85°C 6	at 125°C 7
016008F-18NXKRW	18	10.0	80.0	140	4.5	180	550	500	140
016008F-30NXKRW	30	15.0	120	220	4.0	210	500	455	140
016008F-39NXKRW	39	25.0	170	300	3.5	320	410	375	100
016008F-56NXKRW	56	30.0	260	500	3.0	470	340	300	90
016008F-75NXKRW	75	45.0	360	700	2.7	640	290	260	70
016008F-101XKRW	100	55.0	450	900	2.5	920	240	215	50
016008F-121XKRW	120	70.0	570	1200	2.3	1100	225	200	50

메모

Inductance measured at 7.9 MHz using a Coilcraft CCF1426 fixture in an Agilent/HP 4287 impedance analyzer with Coilcraft-provided correlation pieces.
Impedance measured using an Agilent/HP 4991 with an Coilcraft CCF1481 test fixture.
SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft CCF1406 test fixture.
DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 40°C temperature rise at 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
Maximum current that can be applied at 85°C.
Maximum current that can be applied at 125°C.

종단 처리:

RoHS compliant, matte tin over copper over nickel over molybdenum - manganese

패키지:

W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –55°C to +140°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+140°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Impedance vs Frequency

물리적 특성

A max	B max	C max	D ref	E ref	F ref	G ref	H ref
0.02	0.01	0.015	0.004	0.008	0.006	0.009	0.012	inches
0,50	0,25	0,38	0,10	0,20	0,15	0,23	0,30	mm

테이프 및 릴 사양

tapereel_pa-(1).gif

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)					Orientation
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	T
2000	178	100	13	14,4	8,4	8	2	4	2	0,42

일반 사양

코어 소재:

Ferrite

중량:

0.10 – 0.16 mg

패키지:

2000 per 7″ reel. Paper tape: 8 mm wide, 0.42 mm thick, 2 mm pocket spacing

Temperature coefficient of inductance:

+25 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

창고

언어 설정

통화 설정

016008F (0402)

Ferrite Chip Inductors

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

L vs Frequency

Impedance vs Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

경고