사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0906/1606 Series

Micro Spring™ Air Core Inductors

RoHS 준수 AEC-Q flag
Our 0906/1606 Series Micro Spring™ air core inductors have extremely high Q factors and very tight inductance tolerances, making them suitable for narrowband RF amplifier matching and tuning applications. As their name implies, air core inductors do not use a magnetic core, resulting in their high Q and the lowest possible losses for high-frequency applications. High-reliability versions are available for space, military, and other critical applications.
 
  • Inductance values from 1.65 nH to 12.55 nH (tolerances as low as 1%)
  • Tight tolerance can eliminate circuit tuning
  • Flat top for mechanical stability and reliable pick and place operations
  • Exceptionally high Q over a wide frequency range
  • Very high self resonance (up to 10 GHz)
  • Solder coated leads ensure reliable soldering
  • AEC-Q200 Grade 1 (−40°C to +125°C) 
Need parts for space, military or other critical applications? 
 - See Coilcraft CPS 350/394RAT series.
지금 구매:
개수 단품 가격
1 $1.80
250 $1.30
500 $1.11
1000 $0.88
2000 $0.63
5000 $0.45

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

설계자용 키트:
키트 가격
C308 9 (12 of each) $40.00
C308-2 9 (12 of each) $60.00

사양

Electrical specifications at 25°C.

0906 Series

부품 번호 1 권수 인덕턴스 (nH) 2 허용 오차 (%) 3 Q min
@ 800 MHz 4
SRF min (GHz) 5 DCR max (mΩ) 6 Irms (A) 7
0906-2_L_ 2 1.65 2,5,10 100 10.0 4.0 1.6
0906-3_L_ 3 2.55 1,2,5 100 8.2 5.0 1.6
0906-4_L_ 4 3.85 1,2,5 100 7.5 6.0 1.6
0906-5_L_ 5 5.40 1,2,5 100 7.0 8.0 1.6

1606 Series

부품 번호 1 권수 인덕턴스 (nH) 2 허용 오차 (%) 3 Q min
@ 800 MHz 4
SRF min (GHz) 5 DCR max (mΩ) 6 Irms (A) 7
1606-6_L_ 6 5.60 1,2,5 100 6.5 9.0 1.6
1606-7_L_ 7 7.15 1,2,5 100 6.0 10.0 1.6
1606-8_L_ 8 8.80 1,2,5 100 6.0 12.0 1.6
1606-9_L_ 9 9.85 1,2,5 100 5.2 13.0 1.6
1606-10_L_ 10 12.55 1,2,5 100 4.6 14.0 1.6
메모
  1. When ordering, please specify tolerancetermination and packaging codes: e.g. 1606-10JLC
  2. Inductance measured at 800 MHz using an Agilent/HP 4286A or equivalent with a Coilcraft SMD-A fixture and correlation.
  3. Tolerances in bold are stocked for immediate shipment
  4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A test fixture or equivalents.
  5. SRF measured with an Agilent/HP 8720D network analyzer or equivalent and a Coilcraft SMD-D test fixture.Details
  6. DCR tested at 25°C on a Cambridge Technology Model 510 Micro-ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator
  7. Irms: Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

허용 오차:

  • = 1%, = 2%, = 5%, = 10% (Table above shows stock tolerances in bold.)

종단 처리:

  • L = RoHS compliant tin-silver (96.5/3.5) over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
  • S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

패키지:

  • C = 7" machine-ready reel.
    EIA-481 embossed plastic tape, 500 parts per full reel.
  • B = Less than full reel. In tape, but not machine-ready.
    To have a leader and trailer added ($25 charge), use code letter C instead.
  • P = 7" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel)
환경
환경:
RoHS 준수
주변 온도 범위:
−40°C to +125°C with Irms current.
보관 온도 범위:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+140°C (Ambient + temperature rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

L vs Frequency

Q vs Frequency

L vs Frequency

Q vs Frequency

물리적 특성

microd.gif

0906 Series

A max B max C max D E F max
0.095 0.135 0.060 0.055 ±0.010 0.072 ±0.010 0.020
2,41 3,43 1,52 1,40 ±0,25 1,83 ±0,25 0,51

1606 Series

A max B max C max D E F max
0.165 0.135 0.062 0.055 ±0.010 0.144 ±0.012 0.020
4,19 3,43 1,58 1,40 ±0,25 3,66 ±0,30 0,51

테이프 및 릴 사양

tapereel_pl.gif
  Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
  7"
 (178 mm)
7"
 (178 mm)
A B C D E W P Po P1 H T part_or_j.gif
0906 500 3000* 178 60 13 14,4 8,4 8 4 4 2 1,5 0,3
1606 500 3000* 178 60 13 18,4 12,4 12 4 4 2 1,6 0,3
* Special order
 

일반 사양

중량:
0906: 10 -12 mg; 1606: 18 -27 mg
패키지:
0906: 500 per 7″ reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth
1606: 500 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth
Temperature coefficient of inductance:
+5 to +70 ppm/°C

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
권장 픽앤플레이스 노즐:
OD: 0.059 inch; ID: 0.035 inch
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.