사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DO5010H Series

High Current Surface Mount Power Inductors

RoHS 준수 AEC-Q flag

Coilcraft DO5010H Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance. 

  • Open magnetic flux path
  • High saturation current ratings
  • High energy storage
  • Industry standard footprint
  • AEC-Q200 Grade 3 (−40°C to +85°C)

지금 구매:
개수 단품 가격
1 $2.22
100 $1.91
250 $1.66
500 $1.24
1000 $0.97
2500 $0.77
5000 $0.62

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C355 22 (3 of each) $65.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (mΩ) 3 SRF typ (MHz) 4 Isat (mA) 5 Irms (A) 6
DO5010H-781ML_ 0.78 2.6 156 30000 15.0
DO5010H-152ML_ 1.5 4.0 100 25000 15.0
DO5010H-222ML_ 2.2 6.1 75.0 20000 12.0
DO5010H-332ML_ 3.3 8.6 60.0 17000 10.0
DO5010H-392ML_ 3.9 10.0 55.0 15000 9.0
DO5010H-472ML_ 4.7 14.0 40.0 13000 8.4
DO5010H-602ML_ 6.0 17.0 35.0 12000 7.5
DO5010H-782ML_ 7.8 18.0 35.0 11000 7.5
DO5010H-103ML_ 10 26.0 28.0 10000 6.0
DO5010H-123ML_ 12 28.0 26.0 8500 5.2
DO5010H-153ML_ 15 32.0 20.0 8000 4.4
DO5010H-223ML_ 22 47.0 20.0 7000 3.5
DO5010H-333ML_ 33 66.0 15.0 5500 3.0
DO5010H-473ML_ 47 86.0 9.0 4500 2.6
DO5010H-683ML_ 68 130 8.0 3500 2.3
DO5010H-104ML_ 100 190 7.0 3000 1.8
DO5010H-154ML_ 150 250 6.0 2600 1.5
DO5010H-224ML_ 220 380 5.0 2400 1.2
DO5010H-334ML_ 330 560 4.0 1900 1.0
DO5010H-474ML_ 470 850 3.0 1400 0.82
DO5010H-684ML_ 680 1100 2.0 1200 0.72
DO5010H-105ML_ 1000 1800 2.0 1000 0.56
메모
  1. When ordering, please specify termination and packaging codes: e.g. DO5010H-472MLD
  2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. SRF measured using Agilent/HP 8753D network analyzer.  Details
  5. Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current. Temperature derating curves.
  6. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

종단 처리:

  • L = RoHS compliant tin-silver (96.5/3.5) over copper.
  • T = RoHS tin-silver-copper (95.5/4/0.5) over copper. (Special order, added cost)
  • S = non-RoHS tin-lead (63/37) over copper. (Special order, added cost)

패키지:

  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with Irms current, +85°C to +125°C with derated current
보관 온도 범위:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+125°C (Ambient + temperature rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs Frequency

Inductance vs Current

Irms Derating

물리적 특성

do5010hd.gif
dims_inches_mm-(1).gif

테이프 및 릴 사양

tapereel_pl-(12).gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation‡
13" (330 mm) A B C D E W P Po P1 H T part_or_t-(9).gif or
part_or_d-(5).gif   
250 330 100 13 38,4 32,4 32 24 4 2 7,8 0,38
‡ Dot or number marking does not indicate polarity

일반 사양

코어 소재:
Ferrite
중량:
3.2 – 4.0 g
패키지:
250 per 13″ reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군