사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DO1606T Series

Low Profile Surface Mount Power Inductors

RoHS 준수 AEC-Q flag

Coilcraft DO1606T Series unshielded surface-mount power inductors offer proven performance at a great value. They provide high saturation current ratings, high energy storage, and low resistance. 

  • Open magnetic flux path
  • High saturation current ratings
  • High energy storage
  • Industry standard footprint
  • AEC-Q200 Grade 3 (−40°C to +85°C)

 

지금 구매:
개수 단품 가격
1 $0.95
750 $0.78
1500 $0.59
3000 $0.47
6000 $0.38

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:
설계자용 키트:
키트 가격
C338 20 (3 of each) $60.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (mA) 4 Irms (A) 5
DO1606T-102ML_ 1.0 0.04 230 2500 2.3
DO1606T-152ML_ 1.5 0.06 180 2200 2.1
DO1606T-222ML_ 2.2 0.07 140 1800 1.7
DO1606T-332ML_ 3.3 0.12 110 1400 1.3
DO1606T-472ML_ 4.7 0.15 100 1200 1.1
DO1606T-682ML_ 6.8 0.2 80.0 1100 1.0
DO1606T-822ML_ 8.2 0.23 70.0 1000 0.95
DO1606T-103ML_ 10 0.3 60.0 1000 0.90
DO1606T-153ML_ 15 0.4 45.0 800 0.70
DO1606T-223ML_ 22 0.54 35.0 600 0.50
DO1606T-333ML_ 33 0.74 30.0 500 0.45
DO1606T-473ML_ 47 1.1 22.0 450 0.40
DO1606T-683ML_ 68 1.6 20.0 350 0.35
DO1606T-104ML_ 100 2.3 15.0 300 0.30
DO1606T-154ML_ 150 3.5 10.0 250 0.25
DO1606T-224ML_ 220 5.7 9.0 200 0.18
DO1606T-334ML_ 330 8.2 8.0 160 0.16
DO1606T-474ML_ 470 10.8 7.0 140 0.12
DO1606T-684ML_ 680 17.2 5.0 120 0.10
DO1606T-105ML_ 1000 22.6 4.0 80 0.080
메모
  1. When ordering, please specify termination and packaging codes: e.g. DO1606T-105MLC
  2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent.
  3. DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ.) inductance drop from its value without current.
    Temperature derating curves.
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

 

종단 처리:

  • L = RoHS compliant silver-palladium-platinum-glass frit.
  • T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
  • S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel).
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: −40°C to +125°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+125°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs Frequency

Inductance vs Current

물리적 특성

do1606t.gif
dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl-(1).gif

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_ac-(1).gif
750 2500* 178/330 60/100 13 18,4 12,4 12 8 4 2 2,5 0,3
* Special order

일반 사양

코어 소재:
Ferrite
중량:
116– 136 mg
패키지:
750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.5 mm pocket depth

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈

관련 제품군