Datasheet 3D Model SPICE

ZE2652 Series

Shielded Power Inductors for Texas Instruments PMP23420

Optimized for Texas Instruments’ reference design PMP23420, the ZE2652-AE offers lower DCR and reduced AC losses compared to our standard XGL1313-222, delivering higher efficiency and improved performance.

Optimized for reference design PMP23420 from Texas Instruments
Industry’s lowest DCR and low power losses
High current handling with soft saturation characteristics
AEC-Q200 qualified

지금 구매:

샘플 신청:

사양

Electrical specifications at 25°C. Operating voltage 60 V**

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR (mΩ) 3		SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	typ	max	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
ZE2652-AED	2.2	1.25	1.5	18	20	32	44	33.8	46.5

메모

When ordering, please specify termination code: e.g. ZE2652-AED
Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
DCR measured on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 4395A or equivalent.
Isat: DC current at 25°C that causes the specified inductance drop from its value without current.
Temperature derating curves.
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.
Temperature rise is highly dependent on many factors including pcb land pattern, trace size, air flow, and proximity to other components. Therefore temperature rise should be verified in application conditions.

**Operating voltage: Voltage capability varies by part number and in many cases may be higher than the listed voltage.

종단 처리:

E = Halogen free component. RoHS compliant tin-silver over copper terminations.
T = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
S = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

D = 13" machine-ready reel
EIA-481 embossed plastic tape (200 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with (40°C rise) Irms current

보관 온도 범위:

Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Current

L vs Frequency

물리적 특성

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
200	330	100	13	38,4	32,4	32	24	4	2	13,2	0,5

일반 사양

코어 소재:

Composite

중량:

12 g

패키지:

200/13″ reel Plastic tape: 32 mm wide, 0.50 mm thick, 24 mm pocket spacing, 13.2 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

창고

언어 설정

통화 설정

ZE2652 Series

Shielded Power Inductors for Texas Instruments PMP23420

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

L vs Current

L vs Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

XGL3014 Series

XGL3020 Series

XGL3509, XGL3510 Series

XGL3512 Series

XGL3515 Series

XGL3520 Series

XGL3530 Series

XGL4012 Series

XGL4015 Series

XGL4018 Series

XGL4020 Series

XGL4025 Series

XGL4030 Series

XGL4040 Series

XGL5020 Series

XGL5030 Series

XGL5050 Series

XGL6030 Series

XGL6020 Series

XGL6060 Series

XGL7015 Series

XGL7030 Series

XGL1313 Series

XGL1010 Series

XGL1060 Series

XGL1712 Series

관련 제품군

KTA

XEL

XAL

XFL

XAR

EPL

PFL

경고