3D Model Datasheet Spice 모델 SPICE

LPS3030 Series

Shielded Power Inductors

Small shielded power inductor – only 3.0 × 3.0 × 3.0 mm high
Handles current up to 0.70 A
RoHS-compliant, halogen free. 260°C compatible. Matte tin over nickel over silver terminations
AEC-Q200 Grade 1 (−40°C to +125°C)
COTS Plus tin-silver-copper and tin-lead terminations available

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.48
250	$1.13
600	$0.65
1200	$0.52
2500	$0.44
5000	$0.41

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver

Packaging

C = 7" machine-ready reel

D = 13" machine-ready reel

Tolerance

M = 20%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C485	17 (3 of each)	$65.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	Isat (A) 5			Irms (A) 6
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ±20%)	DCR max (Ω) 3	SRF typ (MHz) 4	10% drop	20% drop	30% drop	20°C rise	40°C rise
LPS3030-103	10	0.15	42.8	0.64	0.68	0.70	0.90	1.2
LPS3030-153	15	0.24	35.7	0.54	0.56	0.60	0.75	1.0
LPS3030-183	18	0.27	26.1	0.50	0.52	0.54	0.70	0.90
LPS3030-223	22	0.31	26.0	0.42	0.46	0.48	0.65	0.85
LPS3030-333	33	0.39	19.6	0.36	0.40	0.42	0.60	0.80
LPS3030-473	47	0.58	14.6	0.32	0.32	0.33	0.50	0.65
LPS3030-683	68	0.73	12.1	0.24	0.26	0.27	0.45	0.62
LPS3030-104	100	1.1	9.8	0.21	0.22	0.23	0.35	0.46
LPS3030-124	120	1.4	8.7	0.19	0.20	0.21	0.32	0.42
LPS3030-154	150	1.9	7.4	0.17	0.18	0.19	0.26	0.34
LPS3030-184	180	2.1	7.0	0.16	0.16	0.17	0.24	0.32
LPS3030-224	220	2.5	6.0	0.14	0.15	0.16	0.22	0.30
LPS3030-334	330	4.3	4.9	0.11	0.12	0.13	0.18	0.23
LPS3030-474	470	5.6	4.1	0.10	0.10	0.11	0.16	0.20
LPS3030-564	560	7.9	3.3	0.080	0.090	0.10	0.12	0.16
LPS3030-684	680	8.9	2.9	0.070	0.080	0.090	0.11	0.15
LPS3030-824	820	10.9	2.9	0.060	0.070	0.080	0.10	0.14

메모

When ordering, please specify termination and packaging codes: e.g. LPS3030-824MRC
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent. Inductance at 1 MHz is the same for parts with SRF >10 MHz.
DCR measured at 25°C on a micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
SRF measured using an Agilent/HP 8753ES or equivalent.
Isat: DC current at which the inductance drops the specified amount from its value without current. Details
Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

종단 처리:

R = RoHS compliant matte tin over nickel over silver.
Q = RoHS tin-silver-copper (95.5/4/0.5). (Special order, added cost)
P = non-RoHS tin-lead (63/37). (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2000 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with (40°C rise) Irms current

보관 온도 범위:

Component: –40°C to +165°C
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+165°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Inductance vs. Frequency

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2000*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,3	0,3

* Special order

일반 사양

코어 소재:

Ferrite

중량:

80 – 90 mg

패키지:

600/7″ reel; 2000/13″ reel; Plastic tape: 12 mm wide, 0.30 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycle

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

권장 픽앤플레이스 노즐:

OD: 3 mm; ID: ≤ 1.5 mm

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

LPS3030 Series

Shielded Power Inductors

사양

종단 처리:

패키지:

성능 곡선

Inductance vs. Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

LPS3008 Series

LPS3010 Series

LPS3015 Series

LPS3314 Series

LPS4012 Series

LPS4010 Series

LPS4018 Series

LPS4040 Series

LPS4414 Series

LPS5010 Series

LPS5015 Series

LPS5030 Series

LPS5050 Series

LPS6225 Series

LPS6235 Series

LPS8045B Series

PA6594-AE Series

관련 제품군

LPZ

MSS/MOS

창고

언어 설정

통화 설정

LPS3030 Series

Shielded Power Inductors

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

Inductance vs. Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

LPS3008 Series

LPS3010 Series

LPS3015 Series

LPS3314 Series

LPS4012 Series

LPS4010 Series

LPS4018 Series

LPS4040 Series

LPS4414 Series

LPS5010 Series

LPS5015 Series

LPS5030 Series

LPS5050 Series

LPS6225 Series

LPS6235 Series

LPS8045B Series

PA6594-AE Series

관련 제품군

LPZ

MSS/MOS

경고