사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

PFD2015 Series

Coupled Power Inductors

RoHS 준수 할로겐 프리
Coilcraft PFD2015 Series of miniature 1:1 coupled power inductors are used as low-power isolation transformers in SEPIC applications, or as common mode chokes. A wide range of inductance values means a large selection of bandwidths, all with low insertion loss.
  • Smallest coupled shielded power inductor – 2.2 × 1.45 mm footprint, 1.5 mm high
  • Excellent as low-power isolation transformers
  • Great for Flyback, SEPIC, Ćuk, Zeta and other applications
  • Magnetically shielded for compact size and minimized EM

지금 구매:
개수 단품 가격
1 $0.94
100 $0.76
250 $0.59
500 $0.41
1000 $0.34
2000 $0.29
5000 $0.27

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

플라이백 용도

부품 번호 1
(Hover for schematics)
인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (Ω) 3 절연
전압 (V)
누설
인덕턴스 (nH) 5
권수비
PFD2015-102ME_ 1.0 0.17 250 65 1 : 1
PFD2015-122ME_ 1.2 0.18 250 71 1 : 1
PFD2015-182ME_ 1.8 0.29 250 110 1 : 1
PFD2015-272ME_ 2.7 0.48 250 162 1 : 1
PFD2015-332ME_ 3.3 0.67 250 200 1 : 1
PFD2015-472ME_ 4.7 1.0 250 285 1 : 1
PFD2015-682ME_ 6.8 1.8 250 415 1 : 1
PFD2015-822ME_ 8.2 2.5 250 500 1 : 1
PFD2015-103ME_ 10 3.4 250 590 1 : 1

SEPIC 용도

부품 번호 1
(Hover for schematics)
인덕턴스 (µH) 2
(허용 오차: ±20%)
DCR max (Ω) 3 SRF typ (MHz) 4 결합 계수 누설
인덕턴스 (nH) 5
Isat (A) 6 Irms (A)
10% drop 20% drop 30% drop 양측 권선 7 단일 권선 8
PFD2015-102ME_ 1.0 0.17 380 0.97 65 0.85 1.1 1.3 0.80 1.1
PFD2015-122ME_ 1.2 0.18 310 0.97 71 0.80 1.1 1.2 0.75 1.1
PFD2015-182ME_ 1.8 0.29 265 0.97 110 0.70 0.85 1.0 0.49 0.69
PFD2015-272ME_ 2.7 0.48 220 0.97 162 0.65 0.82 0.88 0.41 0.58
PFD2015-332ME_ 3.3 0.67 180 0.97 200 0.57 0.71 0.77 0.37 0.53
PFD2015-472ME_ 4.7 1.0 160 0.97 285 0.44 0.55 0.60 0.26 0.37
PFD2015-682ME_ 6.8 1.8 130 0.97 415 0.37 0.42 0.47 0.19 0.27
PFD2015-822ME_ 8.2 2.5 125 0.97 500 0.35 0.38 0.42 0.15 0.21
PFD2015-103ME_ 10 3.4 110 0.97 590 0.30 0.34 0.37 0.13 0.19
메모
  1. When ordering, please specify packaging code: e.g. PFD2015-103MEC
  2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent.
    For SEPIC: When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value.
  3. DCR is for each winding.  DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
    For SEPIC: When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value.
  4. For SEPIC: SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value.
  5. Leakage inductance is for L1 and is measured with L2 shorted.
  6. For SEPIC: DC current, at which the inductance drops the specified amount from its value without current. It is the sum of the current flowing in both windings.
  7. For SEPIC: Irms, both windings: Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. Determine temperature rise.
  8. For SEPIC: Irms, one winding: Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Determine temperature rise.

종단 처리:

  • E = RoHS compliant silver-palladium-platinum-glass frit.
  • R = RoHS compliant matte tin over nickel over silver-platinum-glass frit(Special order, added cost)

패키지:

  • C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
  • B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
  • D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +85°C with Irms current
보관 온도 범위:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+125°C (ambient + temp rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Inductance vs Current

Inductance vs. Frequency

회로도

pfd2015schem.giflpd4012s.gif

물리적 특성

pfd2015d.gif

dims_inches_mm.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 7500* 178/330 60/100 13 14,4 8,4 8 4 4 2 1,63 0,23
* Special order

일반 사양

코어 소재:
Ferrite
중량:
13 – 23 mg
패키지:
2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.63 mm pocket depth
Winding to Winding Isolation:
250 Vrms, one minute

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested with pure water or alcohol only. More info.

관련 제품군