View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

0805USBF Series

Low Profile Common Mode Chokes

Our 0805USBF Series common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also suitable for USB-type C specification 1.0 and provide up to 6.0 GHz differential mode 3 dB cutoff frequency and up to 30 dB common mode noise attenuation in the GHz range.

For noise suppression in ultra high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™,
DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc.
Up to 6.0 GHz differential mode 3 dB cutoff frequency
Up to 30 dB common mode noise attenuation in GHz range
Suitable for USB-type C specification 1.0
AEC-Q200 Grade 1 (−40°C to +125°C)

Refer to Designing Common Mode Filters for design guidance.

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$0.87
200	$0.73
500	$0.52
1000	$0.41
2000	$0.35
4000	$0.32

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

M = 20%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C470	39 (10 of each)	$110.00

사양

Electrical specifications at 25°C.

부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (GHz) 2	공통 모드 감쇠, 통상 (dB)			인덕턴스 최소 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
부품 번호 1	라인	공통 모드 피크 임피던스 (kΩ)	차단 주파수 (GHz) 2	10 MHz	100 MHz	500 MHz	인덕턴스 최소 (nH) 3	Irms (mA) 4	DCR max (Ω) 5	절연 전압 (Vrms) 6
0805USBF-421MR_	2	0.14 @ 3.0 GHz	6.6	0.5	4.6	6.9	28	500	0.11	250
0805USBF-901MR_	2	0.30 @ 3.0 GHz	5.8	2.1	9.1	11.8	60	500	0.14	250
0805USBF-172MR_	2	0.52 @ 2.5 GHz	3.3	4	12.8	15.7	101	500	0.22	250
0805USBF-262MR_	2	0.69 @ 2.0 GHz	2.4	5.7	15.4	18.5	165	500	0.24	250
0805USBF-372MR_	2	0.93 @ 1.8 GHz	1.4	5.8	18.1	22.3	241	500	0.27	250
0805USBF-502MR_	2	1.22 @ 1.5 GHz	0.93	11.2	21.6	25.2	315	500	0.32	250
0805USBF-672MR_	2	1.65 @ 1.2 GHz	0.69	11.3	23.3	27.7	434	450	0.37	250
0805USBF-902MR_	2	1.91 @ 1.0 GHz	0.73	12.6	25.4	30	560	350	0.63	250

메모

When ordering, please specify packaging code: e.g. 0805USBF-902MRC
Frequency at which the differential mode attenuation equals 3 dB
Inductance measured at 100 MHz, with windings connected in parallel, using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture.
Irms: Current per winding that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
250 Vrms, 1 minute interwinding isolation (hipot).

종단 처리:

Matte tin over nickel over silver-palladium-glass frit.

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C with Irms current.

보관 온도 범위:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

140°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	1,295	0,23

*Special order

일반 사양

코어 소재:

Ferrite

중량:

14.7 – 15.5 mg

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

0805USBF Series

Low Profile Common Mode Chokes