View:
소개
사양
환경
성능 곡선
회로도
물리적 특성
테이프 및 릴
납땜/세척

1812CAN Series

Common Mode Choke

Our 1812CAN Series filters a broad frequency range of common mode noise with 50% lower DCR and higher current handling than other CANbus chokes in the market. They are designed for common mode noise suppression on CAN or CAN FD lines in automotive or general industrial automation applications, and can also be used for FlexRay automotive bus systems.

Inductance values from 11 µH to 100 µH
Filters a broad frequency range of common mode noise
50% lower DCR and higher current handling than other CANbus chokes in the market
Designed for common mode noise suppression on CAN or CAN FD
in automotive or general industrial automation applications
Can be used for FlexRay automotive bus system
Low profile 1812 footprint: 4.95 × 3.18 × 3.0 mm
AEC-Q200 Grade 1 (−40°C to +125°C)

Need parts for space, military or other critical applications?
See Coilcraft ST450FRC Series

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.48
100	$1.35
250	$1.22
500	$1.10
1000	$0.97
2500	$0.84
5000	$0.71

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver-palladium-glass frit

Packaging

C = 7" machine-ready reel

B = Less than full reel

Tolerance

N = 30%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

사양

Electrical specifications at 25°C.

부품 번호 1	라인	인덕턴스 (µH) 2 (허용 오차: ±30%)	Irms (mA) 3	DCR max (Ω) 4	절연 전압 (Vrms) 5
부품 번호 1	라인	인덕턴스 (µH) 2 (허용 오차: ±30%)	Irms (mA) 3	DCR max (Ω) 4	절연 전압 (Vrms) 5
1812CAN-113NR_	2	11	460	0.27	250
1812CAN-223NR_	2	22	400	0.4	250
1812CAN-513NR_	2	51	300	0.59	250
1812CAN-104NR_	2	100	260	1.0	250

메모

When ordering, please specify packaging code: e.g. 1812CAN-104NRC
Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter and a Coilcraft CCF 1113 fixture.
Equal current when applied to each winding simultaneously that causes a 25°C temperature rise from 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.
DCR is specified per winding, measured 25°C on a Keithley 580 micro-ohmmeter and a Coilcraft CCF 858 fixture. For other operating temperatures, use this DCR at Temperature calculator.
Winding to winding isolation (hipot) tested for one minute.

종단 처리:

RoHS compliant matte tin over nickel over silverpalladium-glass frit.

패키지:

C = 7" machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13" machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+150°C

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

회로도

물리적 특성

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,05	0,3

* Special order

일반 사양

코어 소재:

Ferrite

중량:

120 – 130 mg

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

1812CAN Series

Common Mode Choke