站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

ED0006-AL

Toroidal Power Filter Inductor

符合RoHS
Coilcraft's ED0006-AL toroidal power choke has flat inductance vs current characteristics.  It was developed as a Class-D low-pass filter element.
  • Developed for the Zetex ZXCD1210 analog input Class-D modulator
  • Also recommended by Zetex for their ZXCD1000 high fidelity Class- D amplifier solution
  • Acts as a low pass filter for the high frequency switching PWM signal

立即购买:
计数 单价
1 $5.06
250 $4.33
500 $3.77
1000 $2.97
2500 $2.57
5000 $2.37

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

规格

Electrical specifications at 25°C.

零件号 电感 (µH) 1
(公差: ±20%)
DCR max (mΩ) 2 SRF typ (MHz) Isat (mA) 3 Irms (A) 4
20°C rise 40°C rise
ED0006-AL 20 42.0 13.0 36000 5.1 7.2
注释
  1. Inductance measured at 100 kHz, 100 mVrms, 0 A using an Agilent/HP 4132 impedance analyzer or equivalent.
  2. DCR measured at 25°C on a Valhalla 4105 ATC digital ohmmeter or equivalent. For other operating temperatures, use this DCR at Temperature calculator.
  3. Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current.
    Temperature derating curves.
  4. Irms: Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

 

端子:

  • Tin-silver-copper over copper.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C with Irms current. +125°C to +165°C with derated current
储存温度范围:
Component: −40°C to +165°C
Packaging trays: −40°C to +80°C
最高元件温度:
+165°C (Ambient + temperature rise)
故障率(FIT)/平均故障间隔时间(MTBF):

性能曲线

Inductance vs Current

Inductance vs Frequency

Irms Derating

物理特性

ed0006d.gif

一般规格

重量:
30.8 g
包装:
25 per tray

焊接/清洗

抗焊接热:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品系列

相关产品族