站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

YA9215-AL

YA9215-ALD

符合RoHS

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $15.53
108 $12.68
252 $9.51
504 $5.71

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:

典型应用

与Microchip EV84C64A一起使用

输入电压 功率 Fsw
38 V 42 V 50 W 800 kHz

规格

Electrical specifications at 25°C.

零件号
(Hover for schematics)
0A时的
电感 (µH) 1
(公差: ±10%)
DCR max (mΩ) 2 最大
漏电感
(µH) 3
匝数比 电压-时间
乘积 (V-µs) 4
隔离
电压 (Vrms) 5
Pri Sec Pri : Sec
YA9215-ALD 3.2 7.35 0.65 0.105 1 : 0.25 75 500
注释
  1. Inductance is for the primary, measured on Agilent/HP 4284A at 800 kHz, 0.8 Vrms, 0 Adc with primary windings connected in parallel.
  2. DCR for the primary is measured with the windings connected in parallel. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  3. Leakage Inductance is for the primary, measured at 800 kHz, 0.8 Vrms, 0 Adc with primary windings connected in parallel and all secondary pins shorted.
  4. Volt-time product is based on primary windings connected in parallel.
  5. 500 Vrms, one minute isolation hipot) from primary to secondary.

端子:

  • RoHS-compliant  260°C compatible. Matte tin over nickel over brass.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +125°C
储存温度范围:
Component: –40°C to +125°C
Tray packaging: –40°C to +80°C
最高元件温度:
+145°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):

原理图

ya9215s.gif

物理特性

ya9215d.gif

dims_inches_mm.gif

一般规格

核心材料:
Ferrite
重量:
11.44 g
包装:
36 per tray

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品系列