站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

DS3316P Series

Shielded Surface Mount Power Inductors

符合RoHS
We will continue to manufacture and support the DS3316P indefinitely, however for new designs, we recommend the MSS1038 as an alternative. The MSS1038 is more cost effective, features a smaller footprint, lower profile, lower DCR and better current handling.

ds33161.jpg
DS3316P          MSS1038
  • This series was always RoHS compliant; only the part numbers changed. Added characters indicate tolerance, RoHS compliance, and packaging.  View old data sheet.
  • Magnetically shielded
  • Up to 5 Arms and 11 A saturating current
  • Robust temperature deflection prevents damage during solder reflow
  • RoHS-compliant. 260°C compatible. Electroplated gold (<50 µin) over phos bronze terminations.
  • COTS Plus tin-silver-copper and tin-lead terminations available
立即购买:
计数 单价
1 $1.48
500 $1.09
1000 $0.84
2000 $0.67
5000 $0.55

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.

规格

Electrical specifications at 25°C.

零件号 1 电感 (µH) 2
(公差: ±20%)
DCR max (Ω) 3 SRF typ (MHz) Isat (mA) 4 Irms (A) 5
DS3316P-102ML_ 1.0 0.021 140 11000 5.0
DS3316P-152ML_ 1.5 0.022 120 9500 4.5
DS3316P-222ML_ 2.2 0.032 80.0 7800 3.8
DS3316P-332ML_ 3.3 0.039 70.0 6000 3.3
DS3316P-472ML_ 4.7 0.054 40.0 5400 2.7
DS3316P-682ML_ 6.8 0.075 38.0 4500 2.2
DS3316P-822ML_ 8.2 0.085 36.0 4000 2.1
DS3316P-103ML_ 10 0.10 35.0 3500 2.0
DS3316P-153ML_ 15 0.15 25.0 3000 1.5
DS3316P-223ML_ 22 0.21 19.0 2000 1.3
DS3316P-333ML_ 33 0.33 15.0 1800 1.1
DS3316P-473ML_ 47 0.47 13.0 1400 0.80
DS3316P-683ML_ 68 0.66 10.0 1300 0.70
DS3316P-104ML_ 100 1.1 7.0 1200 0.60
DS3316P-154ML_ 150 1.6 6.0 800 0.50
DS3316P-224ML_ 220 2.0 5.0 700 0.37
DS3316P-105ML_ 1000 8.3 2.0 320 0.17
注释
  1. When ordering, please specify termination and packaging codes: e.g. DS3316P-105MLD
  2. Inductance tested at 100 kHz, 0.1 Vrms.
  3. DCR measured at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current.
    Temperature derating curves.
  5. Irms: Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

端子:

  • L = Gold over nickel over phos-bronze.
  • T = RoHS tin-silver-copper (95.5/4/0.5)(Special order, added cost)
  • S = non-RoHS tin-lead (63/37)(Special order, added cost)

包装:

  • D = 13" reel, machine-ready 
    EIA-481 embossed plastic tape (1000 per full reel).
  • B = Less than full reel
    In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C with Irms current
储存温度范围:
Component: –40°C to +125°C
Tape and reel packaging: –40°C to +80°C
最高元件温度:
+125°C (ambient + temp rise)
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Inductance vs. Frequency

Inductance vs. Current

物理特性

ds3316d.gif

卷装规格

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_t.gif or
part_or_d.gif
1000 330 100 13 30,4 24,4 24 12 4 2 5,8 0,33
‡ Dot or number marking does not indicate polarity

一般规格

核心材料:
Ferrite
重量:
0.82– 0.87 g
包装:
1000 per 13″ reel Plastic tape: 24 mm wide, 0.33 mm thick, 12 mm pocket spacing, 5.8 mm pocket depth

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

相关产品族