站点设定

仓库
语言设定
货币设定
资源
视频库
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

CCDLF10000

符合RoHS
The CCDLF 8X00 are not recommended for new designs. They are replaced by the CDF8X00, which is electrically identical and uses the same land pattern.

有关该元件的更多信息和规格。

前往系列
立即购买:
计数 单价
1 $11.95
100 $11.71
250 $8.78
500 $5.27
1000 $4.10
2500 $3.51
5000 $3.22

对于大批量采购或非库存产品,点击这里请求报价

. 现货,可今天发货.
索取样品:
设计套件:
套件 电感值 价格
D303 17 (4 of each) $75.00

规格

Electrical specifications at 25°C.

零件号 1 线组数 共模
峰值阻抗 (Ω)
截止
频率 (MHz) 2
最小
电感 (µH) 3
Irms (mA) 4 DCR max (mΩ) 5 隔离
电压 (Vrms) 6
CCDLF 10000L_ 10 523.54 @ 43.0 MHz 43.0 5.0 100 250 300
注释
  1. When ordering, please specify packaging code: e.g. CCDLF 10000LD.
  2. Frequency at which the differential mode attenuation equals −3 dB
  3. Inductance shown for each winding, measured at 1 MHz.
  4. Current rating is for each line.
  5. DCR is for each winding.
  6. Interwinding isolation (hipot) tested for one minute.

端子:

  • RoHS compliant tin-silver-copper over silver-platinum.

包装:

  • D = 13" machine ready reel
    EIA-481 embossed plastic tape (1000 parts per full reel).
  • B = Less than full reel. 
    In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead.
环境
环境:
符合RoHS
环境温度范围:
–40°C to +85°C
储存温度范围:
Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
故障率(FIT)/平均故障间隔时间(MTBF):
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332

性能曲线

Attenuation (Ref: 50 Ohms)

Impedance vs Frequency

原理图

CCDLF 10000 CCDLF 8000/8500
ccdlf10s.gif ccdlf8s.gif

 

物理特性

CCDLF 10000 Series

ccdlf10d.gif
dims_inches_mm.gif
 

CCDLF 8000/8500 Series

ccdlf8d.gif
dims_inches_mm-(1).gif
 

元件标识

ccdlfm.gif

卷装规格

tapereel_pl.gif

 
  Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
Series 13" (330 mm) A B C D E W P Po P1 H T
CCDLF 10000 1000 330 100 13 22,4 16,4 16 12 4 2 5,0 0,28
CCDLF 8500 1000 330 100 13 22,4 16,4 16 12 4 2 4,5 0,46
 
CCDLF 8000 1000 330 100 13 22,4 16,4 16 12 4 2 4,5 0,46

一般规格

核心材料:
Ferrite
重量:
670 mg

焊接/清洗

湿气敏感度等级(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
抗焊接热:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
焊接之前,请参阅焊接线艺元件
PCB清洗:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

相关产品

相关产品系列