사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

T6522 Surface Mount

High Frequency Current Sense Transformer

RoHS 준수
  • For use at 50 kHz to 300 kHz and above
  • Small surface mount package
  • 1 Volt per Ampere sensitivity (sensed current windings in parallel)
  • Output sensitivity is doubled by connecting sensed current windings in series
지금 구매:
개수 단품 가격
1 $5.18
375 $4.45
750 $3.87
1500 $3.01
3000 $2.58
6000 $2.37

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1
(Hover for schematics)
인덕턴스
최소 (mH) 2
DCR max (Ω) 3 권수비 4 전압시간적
(V-µs) 5
주파수 (kHz) 6 전류 (A) 종단
저항 RT (Ω) 7
절연
전압 (Vrms) 8
Pri Sec Pri : Sec
T6522-AL_ 3.4 0.006 0.700 1 : 50 30 50 >300 3.0 50.0 500
메모
  1. When ordering, please specify packaging code: e.g. T6522-ALD
  2. Inductance is for the secondary, measured at 100 kHz, 0.1 Vrms.
  3. DCR at 25°C. For other operating temperatures, use this DCR at Temperature calculator.
  4. The two primary windings may be connected in parallel (1 : 50) to provide up to 3 A (Iin) sensing capability (3 Vout), or connected in series (2 : 50) to provide twice the sensitivity (1 A Iin yields 2 Vout).
  5. Maximum volt-time product for the secondary.
  6. For specific questions regarding frequency range, please contact us at [email protected]
  7. Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT (Ohms) = Vout × Nsec / Iin.
  8. 500 Vrms primary to secondary isolation.

종단 처리:

  • RoHS compliant. 260°C compatible. Tin-silver-copper over silver-palladium-platinum-glass frit terminations.

패키지:

  • 13" reel, machine-ready 
    EIA-481 embossed plastic tape (750 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • B = Less than full reel
    In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to D.
환경
환경:
RoHS 준수
주변 온도 범위:
–40°C to +85°C
보관 온도 범위:
Component: –40°C to +185°C
Tape and reel packaging: –40°C to +80°C
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Voltage vs Current

회로도

senhisms.gif
Varying terminating resistance increases or decreases output Voltage/Ampere according to the following equation: RT = Vout × Nsec / Iin.

물리적 특성

senhismd.gif

테이프 및 릴 사양

tapereel_pl.gif

 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
13" (330 mm) A B C D E W P Po P1 H T part_or_w.gif
750 330 100 13 30,4 24,4 24 12 4 2 6,5 0,37

일반 사양

중량:
0.9 g
패키지:
750/13″ reel Plastic tape: 24 mm wide, 0.37 mm thick, 12 mm pocket spacing, 6.5 mm pocket depth.

세척

PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품 시리즈