3D Model Datasheet Spice 모델

1008AF-103

Name: 1008AF-103XKRC
Brand: Coilcraft
SKU: 1008AF-103XKRC
Price: 0.53 USD
Availability: InStock

1008AF-103XJRC, 1008AF-103XKRC

부품에 대한 추가 정보 및 사양.

시리즈로 이동

지금 구매:

개수	단품 가격
1	$1.29
200	$1.01
500	$0.76
1000	$0.53
2000	$0.41
4000	$0.31
10000	$0.27

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte Sn over Ni over Ag-Pt-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

K = 10%

J = 5%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

설계자용 키트:

키트	값	가격
C414	14 (10 of each)	$45.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2	허용 오차 (%) 3	Q typ @ 2.5 MHz	SRF min (MHz) 4	Isat (mA) 5	DCR max (Ω) 6	Irms (A) 7
부품 번호 1	인덕턴스 (µH) 2	허용 오차 (%) 3	Q typ @ 2.5 MHz	SRF min (MHz) 4	Isat (mA) 5	DCR max (Ω) 6	Irms (A) 7
1008AF-103X_R_	10	5,10	24	22.0	450	0.46	0.55

메모

When ordering, please specify tolerance, termination and packaging codes: e.g. 1008AF-103XJRC
Inductance measured at 2.5 MHz using Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
Tolerances in bold are stocked for immediate shipment.
SRF measured using an Agilent/HP 8753D network analyzer with a Coilcraft SMD-D fixture.
Isat: DC current at 25°C that causes a 10% (typ) inductance drop from its value without current.
DCR measured on a Cambridge Technology Micro-ohmmeter. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Temperature derating curves.

허용 오차:

J = 5% K = 10% (Table above shows stock tolerances in bold.)

종단 처리:

R = RoHS compliant. Matte Sn over Ni over Ag-Pt-glass frit terminations.

T = RoHS Sn/Ag/Cu (95.5/4.0/0.5) (Special order, added cost)
S = Not RoHS Sn/Pb (63/37) (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +85°C with Irms current

보관 온도 범위:

Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+125°C (ambient + temp rise). Derating.

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Current

L vs Frequency

Q vs Frequency

물리적 특성

Note: Height dimension is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	7500*	178/330	60/100	13	14,4	8,4	8	4	4	2	2,0	0,3

*Special order

일반 사양

코어 소재:

Ferrite

중량:

28 – 33 mg

패키지:

2000 per 7″reel; 7500 per 13″ reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth

Temperature coefficient of inductance:

+100 to +350 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

1008AF-103

1008AF-103XJRC, 1008AF-103XKRC