사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0402FL-561

0402FL-561XJRW

RoHS 준수 할로겐 프리

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $1.05
200 $0.81
500 $0.61
1000 $0.43
2000 $0.33
4000 $0.26

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (nH) 2
(허용 오차: ±5%)
임피던스, 통상 (Ω) SRF typ (MHz) 3 DCR max (Ω) 4 Irms (mA)
100 MHz 900 MHz at 25°C 5 at 85°C 6 at 125°C 7
0402FL-561XJR_ 560 327 5025 700 0.97 290 260 150
메모
  1. When ordering, please specify packaging code: e.g. 0402FL-561XJRW
  2. Inductance measured at 7.9 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer.
  3. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
  4. DCR measured on Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  5. Current that causes a 40°C temperature rise at 25°C. This information is for reference only and does not represent absolute maximum ratings. Because of their open construction, these parts will not saturate.
  6. Maximum current that can be applied at 85°C.
  7. Maximum current that can be applied at 125°C.

종단 처리:

  • R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.

패키지:

  • W = 7" machine-ready reel
    EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • Y = 7" machine-ready reel
    EIA-481 punched paper tape (10,000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
–40°C to +125°C with Irms current
보관 온도 범위:
Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
최고 부품 온도:
+140°
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

L vs Frequency

Z vs Frequency

물리적 특성

0402fld.gif

A max B max C max D E F G H  
0.044 0.028 0.022 0.022 0.007 0.014 0.025 0.026 inches
1,11 0,72 0,55 0,55 0,18 0,36 0,635 0,66 mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

테이프 및 릴 사양

tapereel_pa.gif

Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 178 100 13 14,4 8,4 8 4 4 2 N/A 0,68
10000 178 100 13 14,4 8,4 8 4 4 2 N/A 0,68

일반 사양

코어 소재:
Ferrite
중량:
0.9 – 1.1 mg
패키지:
2000 per 7″ reel or 10,000 per 7″ reel. Paper tape: 8 mm wide, 0.68 mm thick, 4 mm pocket spacing
Temperature coefficient of inductance:
+25 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

관련 제품

관련 제품 시리즈