Datasheet (HA Series) Datasheet (PA/TA Series) Spice 모델 SPICE S-Param 3D 모델

1812 (4532)

Ceramic Chip Inductors for DOCSIS 3.x

Our HA403x Series was designed for DOCSIS 3.x applications and has our highest Q factors in an 1812 footprint. It also features excellent current handling and very low DC resistance for lowest insertion loss.

Our highest Q factors in an 1812 form factor
Excellent current handling
Very low DCR
Inductance values from 39 nH to 390 nH

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.26
200	$0.96
600	$0.70
1200	$0.56
3000	$0.45
6000	$0.38

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

L = Silver-palladium-platinum-glass frit

Packaging

C = 7" machine-ready reel

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C458	6 (10 of each)	$45.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 2%)	Q typ @ 50.0 MHz 3	SRF typ (GHz) 4	DCR max (mΩ) 5	Irms (mA) 6
부품 번호 1	인덕턴스 (nH) 2 (허용 오차: ± 2%)	Q typ @ 50.0 MHz 3	SRF typ (GHz) 4	DCR max (mΩ) 5	Irms (mA) 6
TA7849-AE_	39	49	2.5	120	1100
TA7850-AE_	47	55	1.9	110	1100
TA7851-AE_	56	55	1.9	126	920
TA7852-AE_	68	55	2.0	149	900
PA6691-AE_	80	61	1.3	140	900
PA6692-AE_	100	62	1.2	160	860
PA6693-AE_	120	67	0.99	160	860
HA4031-AL_	150	75	0.86	100	1150
HA4032-AL_	180	80	0.85	105	1150
HA4033-AL_	220	80	0.70	110	940
HA4034-AL_	270	85	0.73	120	940
HA4035-AL_	330	80	0.60	135	850
HA4036-AL_	390	80	0.60	150	850

메모

When ordering, please specify termination and packaging codes: e.g. HA4031-ALC
Inductance measured at 50 MHz, using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces.
Q measured measured at 50 MHz, using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture.
SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF859 test fixture. For other operating temperatures, use this DCR at Temperature calculator.
Current that causes a 15°C temperature rise from 25°C ambient.

종단 처리:

L = RoHS compliant silver-palladium-platinum-glass frit.
R = RoHS compliant matte tin over nickel over silver platinum-glass frit.
S = non-RoHS tin-lead (63/37). (Special order, added cost)
T = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37) over matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)
Q = RoHS tin-silver-copper (95.5/4/0.5) over matte tin over nickel over silver-platinum-glass frit. (Special order, added cost)

패키지:

C = 7" machine-ready reel
EIA-481 embossed plastic tape (600 parts per full reel).
B = Less than full reel
In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13" reel, machine-ready
EIA-481 embossed plastic tape. Factory order only, not stocked (2200 parts per full reel).

환경

환경:

RoHS 준수

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C

최고 부품 온도:

+140°C (ambient + temp rise)

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

HA Series

Q vs Frequency

HA Series

L vs Frequency

TA/PA Series

Q vs Frequency

TA/PA Series

물리적 특성

A max	B max	C max	D ref	E	F	G	H	I	J
0.195	0.150	0.135	0.070	0.100	0.025	0.128	0.120	0.045	0.118	inches
4,95	3,81	3,43	1,78	2,54	0,64	3,25	3,05	1,14	3,00	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm

테이프 및 릴 사양

Parts per reel		Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	13" (330 mm)	A	B	C	D	E	W	P	Po	P1	H	T
600	2200*	178/330	60/100	13	18,4	12,4	12	8	4	2	3,7	0,3

* Special order

일반 사양

코어 소재:

Ceramic

중량:

109 – 128 mg

Temperature coefficient of inductance:

+25 to +125 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

1812 (4532)

Ceramic Chip Inductors for DOCSIS 3.x

사양

종단 처리:

패키지:

성능 곡선

L vs Frequency

Q vs Frequency

L vs Frequency

Q vs Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

1812CS (4532)

창고

언어 설정

통화 설정

1812 (4532)

Ceramic Chip Inductors for DOCSIS 3.x

선택한 구성 공급 불가

사양

종단 처리:

패키지:

성능 곡선

L vs Frequency

Q vs Frequency

L vs Frequency

Q vs Frequency

물리적 특성

테이프 및 릴 사양

일반 사양

납땜/세척

관련 제품 시리즈

1812CS (4532)

경고