3D Model Datasheet Spice 모델 SPICE S-Param

0603HL (1608)

High Inductance Ceramic Chip Inductors

Coilcraft's 0603HL Series ceramic chip inductors have the highest inductance values in this size - up to 3.3 µH. Wirewound ceramic construction means high Q and high peak current handling. Their tight ± 5% inductance tolerance results in minimal variation.

Highest inductance values in 0603 size: from 330 nH to 3.3 µH
High Q wirewound construction
±5% inductance tolerance

Need parts for space, military or other critical applications?
See Coilcraft AR312RAP Series | See Coilcraft ST312RAP Series

지금 구매:

부품 번호

내 부품 찾기

개수	단품 가격
1	$1.19
200	$0.96
500	$0.72
1000	$0.48
2000	$0.34
4000	$0.27
10000	$0.22

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

Termination

R = Matte tin over nickel over silver-platinum-glass frit

Packaging

C = 7" machine-ready reel

Tolerance

J = 5%

. 재고 보유 중, 당일 발송 가능.

샘플 신청:

부품 번호

내 부품 찾기

설계자용 키트:

키트	값	가격
C449	14 (10 of each)	$45.00

사양

Electrical specifications at 25°C.

부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ± 5%)	Q typ @ 25.0 MHz 3	SRF typ (MHz) 4	DCR max (Ω) 5	Irms (mA) 6	색상 코드 7
부품 번호 1	인덕턴스 (µH) 2 (허용 오차: ± 5%)	Q typ @ 25.0 MHz 3	SRF typ (MHz) 4	DCR max (Ω) 5	Irms (mA) 6	색상 코드 7
0603HL-331XJR_	0.33	13	420	0.97	330	Violet
0603HL-391XJR_	0.39	13	400	1.1	330	Gray
0603HL-471XJR_	0.47	12	200	1.2	300	White
0603HL-511XJR_	0.51	12	340	1.2	300	Black
0603HL-561XJR_	0.56	12	330	1.4	300	Brown
0603HL-681XJR_	0.68	12	310	1.8	260	Red
0603HL-821XJR_	0.82	14	290	2.5	190	Orange
0603HL-102XJR_	1.0	14	250	2.8	190	Yellow
0603HL-122XJR_	1.2	14	230	3.2	180	Green
0603HL-152XJR_	1.5	15	190	4.1	150	Blue
0603HL-182XJR_	1.8	16	180	5.3	140	Violet
0603HL-222XJR_	2.2	16	165	5.9	130	Gray
0603HL-272XJR_	2.7	16	150	7.0	120	White
0603HL-332XJR_	3.3	18	135	9.1	110	Black

메모

When ordering, please specify termination and packaging code: 0603HL-332XJRC
Inductance measured at 0.1 Vrms, using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent with Coilcraft provided correlation pieces.
Q measured using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent.
SRF measured using Agilent/HP 8753D network analyzer with Coilcraft SMD-D test fixture
DCR measured on Cambridge Technology Micro-ohmmeter or equivalent.
Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.
Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values. Details.

종단 처리:

R = RoHS compliant matte tin over nickel over silver-platinum-glass frit.
Q = RoHS tin-silver-copper (95.5/4/0.5) (Special order, added cost)
P = non-RoHS tin-lead (63/37) (Special order, added cost)

패키지:

C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C.

환경

환경:

RoHS 준수 , 할로겐 프리

주변 온도 범위:

–40°C to +125°C with Irms current

보관 온도 범위:

Component: –40°C to +140°C.
Tape & reel packaging: –40°C to +80°C

최고 부품 온도:

+140°C (ambient + temp rise).

고장 비율(FIT) / 평균 고장률(MTBF):

See FIT/MTBF Calculations

성능 곡선

L vs Frequency

Q vs Frequency

Z vs Frequency

물리적 특성

A max	B max	C max	D	E	F	G	H	I	J
0.071	0.047	0.037	0.010	0.030	0.011	0.038	0.040	0.025	0.025	inches
1,80	1,19	0,94	0,25	0,76	0,28	0,97	1,02	0,64	0,64	mm

Height dimension (C) is before optional solder application.
For maximum height dimension including solder, add 0.006 in / 0,152 mm.

테이프 및 릴 사양

Parts per reel	Reel dimensions (mm)					Tape dimensions (mm)						Orientation
7" (178 mm)	A	B	C	D	E	W	P	Po	P1	H	T
2000	178	100	13	14,4	8,4	8	4	4	2	1,0	0,23

일반 사양

코어 소재:

Ceramic

중량:

3.2 – 4.4 mg

패키지:

2000 per 7″ reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.0 mm pocket depth

Temperature coefficient of inductance:

+50 to +150 ppm/°C

납땜/세척

수분 민감도(MSL):

1 (unlimited floor life at <30°C / 85% relative humidity)

납땜 열 내성:

Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.

PCB 세척:

Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info

0603HL (1608)

High Inductance Ceramic Chip Inductors