사이트 설정

창고
언어 설정
통화 설정
리소스
비디오 라이브러리
Cx Family Common Mode Chokes
0402CT Low Profile Chip Inductors
XAL7050 High-inductance Shielded Power Inductors
XGL4020 Ultra-low DCR Power Inductors

0603DC-82N

0603DC-82NXGRW, 0603DC-82NXJRW

RoHS 준수 할로겐 프리 AEC-Q flag

부품에 대한 추가 정보 및 사양.

시리즈로 이동
지금 구매:
개수 단품 가격
1 $0.71
200 $0.57
500 $0.43
1000 $0.29
2000 $0.20
4000 $0.15

대량 또는 비재고 품목의 경우, 견적서를 요청하십시오.

. 재고 보유 중, 당일 발송 가능.
샘플 신청:

설계자용 키트:
키트 가격
C487 43 (10 of each) $100.00
C487-2 43 (10 of each) $120.00

사양

Electrical specifications at 25°C.

부품 번호 1 인덕턴스 (nH) 2 허용 오차 (%) 3 900 MHz SRF typ (GHz) 5 DCR max (Ω) 6 Irms (mA)
Q typ 4 at 25°C 7 at 85°C 8 at 125°C 9
0603DC-82NX_RW 82 2,3,5 66 1.55 0.424 830 740 390
메모
  1. When ordering, please specify tolerance code: e.g. 0603DC-R47XJRW.
  2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP E4982A impedance analyzer with Coilcraft-provided correlation pieces.
  3. Tolerances in bold are stocked for immediate shipment.
  4. Q measured using an Agilent/HP 4991A with an Agilent/HP 16197 test fixture.
  5. SRF measured using an Agilent/HP 5071C/8722ES network analyzer and a Coilcraft SMD-D/CCF 1052 test fixture. Details
  6. DCR measured on a micro-ohmmeter and a Coilcraft CCF1010/A test fixture. For other operating temperatures, use this DCR at Temperature calculator.
  7. Irms: current that causes a 40°C temperature rise at 25°C. This information is for reference only and does not represent absolute maximum ratings.
  8. Irms: maximum current that can be applied at 85°C. This information is for reference only and does not represent absolute maximum ratings.
  9. Irms: maximum current that can be applied at 125°C ambient. This information is for reference only and does not represent absolute maximum ratings.

허용 오차:

  • G = 2%, H = 3%, J = 5%

종단 처리:

  • RoHS Compliant. 260°C compatible. Matte tin over nickel over silver-glass frit terminations.

패키지:

  • W = 7" machine-ready reel
    EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
  • Q = 13" machine-ready reel 
    EIA-481 punched paper tape. Factory order only, not stocked (5000 parts per full reel).
  • Y = 13" machine-ready reel 
    EIA-481 punched paper tape. Factory order only, not stocked (10000 parts per full reel).
환경
환경:
RoHS 준수 , 할로겐 프리
주변 온도 범위:
−40°C to +125°C with Irms current
보관 온도 범위:
Component: −40°C to +140°C
Tape and reel packaging: −40°C to +80°C
최고 부품 온도:
+140°C (Ambient + temperature rise)
고장 비율(FIT) / 평균 고장률(MTBF):

성능 곡선

Q versus Frequency

L versus Frequency

물리적 특성

0603dcd.gif
A max B max C max D E F G H  
0.067 0.039 0.035 0.028 0.013 0.033 0.016 0.051 inches
1,70 0,99 0,89 0,71 0,33 0,85 0,40 1,29 mm

테이프 및 릴 사양

tapereel_pa.gif
 
Parts per reel Reel dimensions (mm) Tape dimensions (mm) Orientation
7" (178 mm) 13" (330 mm) A B C D E W P Po P1 H T part_or_i.gif
2000 5000 / 10000* 178/330 100 13 14,4 8,4 8 4 4 2 N/A 0,95
* Special order

일반 사양

코어 소재:
Ceramic
중량:
3 – 4 mg
패키지:
2000/7" reel; ; 5000/10000/13″ reel Paper tape: 8 mm wide, 0.95 mm thick, 4 mm pocket spacing

납땜/세척

수분 민감도(MSL):
1 (unlimited floor life at <30°C / 85% relative humidity)
납땜 열 내성:
Three reflows at >217°C for 90 seconds (+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room temperature between.
납땜 전에 Coilcraft 부품의 납땜을 참조하십시오.
PCB 세척:
Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. More info.

관련 제품

관련 제품 시리즈